Parameters |
Factory Lead Time |
1 Week |
Lifecycle Status |
PRODUCTION (Last Updated: 1 week ago) |
Contact Plating |
Tin |
Mounting Type |
Through Hole |
Package / Case |
16-DIP (0.300, 7.62mm) |
Number of Pins |
16 |
Supplier Device Package |
16-PDIP |
Operating Temperature |
-40°C~85°C TA |
Packaging |
Tube |
Part Status |
Active |
Moisture Sensitivity Level (MSL) |
1 (Unlimited) |
Resistance |
115Ohm |
Max Operating Temperature |
85°C |
Min Operating Temperature |
-40°C |
Max Power Dissipation |
470mW |
Base Part Number |
ADG212 |
Number of Outputs |
4 |
Operating Supply Voltage |
5V |
Polarity |
Non-Inverting |
Number of Channels |
4 |
Interface |
Parallel |
Number of Circuits |
4 |
Max Supply Voltage |
25V |
Power Dissipation |
22.5mW |
Max Supply Current |
1mA |
Number of Bits |
4 |
Throw Configuration |
SPST |
Turn On Delay Time |
600 ns |
Number of Inputs |
4 |
Voltage - Supply, Single/Dual (±) |
15V ±15V |
Supply Type |
Dual |
Turn-Off Delay Time |
450 ns |
Max Dual Supply Voltage |
22V |
On-State Resistance (Max) |
115Ohm |
High Level Output Current |
30mA |
Dual Supply Voltage |
15V |
Multiplexer/Demultiplexer Circuit |
1:1 |
Current - Leakage (IS(off)) (Max) |
5nA |
Channel Capacitance (CS(off), CD(off)) |
5pF 5pF |
Switch Circuit |
SPST - NO |
Switch Time (Ton, Toff) (Max) |
600ns, 450ns |
Charge Injection |
20pC |
Channel-to-Channel Matching (ΔRon) |
5.75Ohm |
Crosstalk |
-80dB @ 100kHz |
Drain to Source Resistance |
115mOhm |
Height |
3.3mm |
Length |
20.07mm |
Width |
6.35mm |
Radiation Hardening |
No |
REACH SVHC |
No SVHC |
RoHS Status |
ROHS3 Compliant |
Lead Free |
Contains Lead |
ADG212AKNZ Overview
This electronic part is conveniently packaged in 16-DIP (0.300, 7.62mm), making it easy to ship abroad. High reliability is ensured by the advanced packaging method Tube. Multiplexers like this are mounted in the Through Hole position. There is 1:1 ratio between the number of multiplexers and demultiplexers. Operating temperature around -40°C~85°C TA extended. By its 4 channels, the electronic component provides high-quality output. The analog switch ics are built using SPST - NO switching circuits. The multiplexer consists of 4 circuits. Look for analog switch ic variants by searching with ADG212. In this multiplexer, the internal resistance is 115Ohm. To find out what the functions of 16 pins are, please refer to their datasheets. It is generally not recommended to supply a voltage higher than 25V to the switch device in normal circumstances. Dual supply type digital switch with a low cost. It may damage the digital multiplexer if the voltage is higher than 1mA. Despite this switch's dual supply capability, its voltage should not exceed 22V. The electrical part can be operated at 5V voltage levels. The electrical component supports 4 inputs. Temperatures over 85°C should not be allowed for the multiplexer to operate. Drain to Source resistance is 115mOhm. There are 4 outputs on the analogue multiplexer. Suppliers offer 16-PDIP packages. It is able to conduct in a 4-bit way.
ADG212AKNZ Features
4 Channels
Switch Circuit: SPST - NO
Drain-to-Source resistance: 115mOhm
4-Bit
ADG212AKNZ Applications
There are a lot of Analog Devices Inc. ADG212AKNZ Analog Switches & Multiplexers ICs applications.
- Voice over IP/DSL – Integrated Access Devices, Smart
- Automatic test equipment
- Battery-powered systems
- Communications systems
- Sample hold systems
- ADCs such as AD7840/8, AD7870/1/2/4/5/6/8
- Fault Tolerant Systems
- CSU
- High speed data transmission line cards
- Automotive applications