ADG212AKRZ

600ns, 450ns SPST - NO 115Ohm Analog Switches BREAK-BEFORE-MAKE ADG212 16 Pins 5nA 15V 16-SOIC (0.154, 3.90mm Width)

Manufacturer: Analog Devices Inc.
Nocochips NO: 84-ADG212AKRZ
Package: 16-SOIC (0.154, 3.90mm Width)
Datasheet: PDF
Stock: 437
Description: 600ns, 450ns SPST - NO 115Ohm Analog Switches BREAK-BEFORE-MAKE ADG212 16 Pins 5nA 15V 16-SOIC (0.154, 3.90mm Width)(Kg)

Details

Tags

Parameters
Factory Lead Time	1 Week
Lifecycle Status	PRODUCTION (Last Updated: 1 week ago)
Mounting Type	Surface Mount
Package / Case	16-SOIC (0.154, 3.90mm Width)
Surface Mount	YES
Number of Pins	16
Operating Temperature	-40°C~85°C TA
Packaging	Tube
JESD-609 Code	e3
Pbfree Code	no
Part Status	Active
Moisture Sensitivity Level (MSL)	1 (Unlimited)
Number of Terminations	16
ECCN Code	EAR99
Resistance	115Ohm
Terminal Finish	Matte Tin (Sn)
Subcategory	Multiplexer or Switches
Max Power Dissipation	470mW
Technology	CMOS
Terminal Form	GULL WING
Peak Reflow Temperature (Cel)	260
Number of Functions	4
Supply Voltage	15V
Terminal Pitch	1.27mm
Time@Peak Reflow Temperature-Max (s)	30
Base Part Number	ADG212
Output	SEPARATE OUTPUT
Pin Count	16
Operating Supply Voltage	5V
Number of Channels	4
Interface	Parallel
Max Supply Voltage	25V
Power Dissipation	22.5mW
Max Supply Current	1mA
Throw Configuration	SPST
Turn On Delay Time	600 ns
Supply Type	Dual
Neg Supply Voltage-Nom (Vsup)	-15V
Turn-Off Delay Time	450 ns
Max Dual Supply Voltage	22V
On-State Resistance (Max)	115Ohm
Dual Supply Voltage	15V
Multiplexer/Demultiplexer Circuit	1:1
Off-state Isolation-Nom	80 dB
Current - Leakage (IS(off)) (Max)	5nA
Channel Capacitance (CS(off), CD(off))	5pF 5pF
Switch Circuit	SPST - NO
Switch Time (Ton, Toff) (Max)	600ns, 450ns
Charge Injection	20pC
Channel-to-Channel Matching (ΔRon)	5.75 Ω
Crosstalk	-80dB @ 100kHz
Switching	BREAK-BEFORE-MAKE
Drain to Source Resistance	115Ohm
Normal Position	NO
Voltage - Supply, Dual (V±)	±15V
Height	1.5mm
Length	10mm
Width	4mm
Radiation Hardening	No
REACH SVHC	No SVHC
RoHS Status	ROHS3 Compliant
Lead Free	Contains Lead

ADG212AKRZ Overview

Shipping overseas is convenient with the electronic component packed in 16-SOIC (0.154, 3.90mm Width). High reliability is achieved by using advanced packaging method Tube. Mounted in Surface Mount is this multiplexer. There is 1:1 ratio between the number of multiplexers and demultiplexers. The operating temperature is extended to around -40°C~85°C TA. Totally, there are 16 terminations. As a result of its 4 channels, this electronic component provides high-quality output. It is safe to turn on and run the electronic component with a 15V voltage supply. Into the electrical component body are injected 16 pins. SPST - NO switching circuits are used in these analog switch ics. Using the ADG212 search parameter, you can discover variants of the switch. In this multiplexer, the internal resistance is 115Ohm. To find out what the 16 pins do, please refer to the datasheets. It is a typical Multiplexer or Switches analog multiplexer. It is normally recommended that users do not supply the multiplexer with voltages higher than 25V. Digital switch that provides Dual power at a cost-effective price. The switch multiplexer may be damaged if it is exposed to voltage greater than 1mA. For this multiplexer, dual supply voltage is feasible, but it should not exceed 22V. The analog switch ic utilizes SEPARATE OUTPUT outputs in total. 5V operating voltages are supported by the electronic component. The Drain to Source resistance of this electronic component is 115Ohm.