ADG221KPZ
| Parameters | |
|---|---|
| Number of Terminations | 20 |
| ECCN Code | EAR99 |
| Resistance | 90Ohm |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Multiplexer or Switches |
| Max Power Dissipation | 25.5mW |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | J BEND |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 4 |
| Supply Voltage | 15V |
| Terminal Pitch | 1.27mm |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | ADG221 |
| Output | SEPARATE OUTPUT |
| Pin Count | 20 |
| Qualification Status | Not Qualified |
| Operating Supply Voltage | 15V |
| Number of Channels | 4 |
| Interface | Parallel |
| Max Supply Voltage | 25V |
| Power Dissipation | 25.5mW |
| Max Supply Current | 1.5mA |
| Throw Configuration | SPST |
| Turn On Delay Time | 300 ns |
| Supply Type | Dual |
| Neg Supply Voltage-Nom (Vsup) | -15V |
| Turn-Off Delay Time | 250 ns |
| Max Dual Supply Voltage | 22V |
| On-State Resistance (Max) | 90Ohm |
| Dual Supply Voltage | 15V |
| Multiplexer/Demultiplexer Circuit | 1:1 |
| Off-state Isolation-Nom | 80 dB |
| Current - Leakage (IS(off)) (Max) | 2nA |
| Channel Capacitance (CS(off), CD(off)) | 5pF 5pF |
| On-state Resistance Match-Nom | 5Ohm |
| Switch Circuit | SPST - NC |
| Switch Time (Ton, Toff) (Max) | 350ns, 250ns |
| Charge Injection | 20pC |
| Channel-to-Channel Matching (ΔRon) | 4.5 Ω |
| Crosstalk | -80dB @ 100kHz |
| Switching | BREAK-BEFORE-MAKE |
| Normal Position | NC |
| Voltage - Supply, Dual (V±) | ±15V |
| Length | 8.966mm |
| Width | 8.966mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Contains Lead |
| Factory Lead Time | 1 Week |
| Lifecycle Status | PRODUCTION (Last Updated: 1 week ago) |
| Mounting Type | Surface Mount |
| Package / Case | 20-LCC (J-Lead) |
| Surface Mount | YES |
| Number of Pins | 20 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tube |
| JESD-609 Code | e3 |
| Pbfree Code | no |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
ADG221KPZ Overview
The electronic part can be shipped overseas conveniently because it is packaged in 20-LCC (J-Lead). This packaging method provides high reliability because it uses advanced packaging techniques. Mounted in Surface Mount is this multiplexer. In the multiplexer and demultiplexer, 1:1 represents the number of circuits. The operating temperature is extended to around -40°C~85°C TA. The total number of terminations is 20. Due to its 4 channels, the electrical component produces high-quality output. In the case of a voltage supply of 15V volts, the electrical part can be powered up and run. A total of 20 pins are injected into the body of the electronic part. The analog switch ics are built using SPST - NC switching circuits. Search with ADG221 if you are looking for analog multiplexer variants. An switch multiplexer with 90Ohm internal resistance has a value of 90Ohm. The datasheets for the 20 pins explain the functions. There is a standard Multiplexer or Switches analogue multiplexer here. Multiplexers should not be powered above 25V in normal situations. Analog switch ics with Dual supply type are cost-effective. Put voltage above 1.5mA on the multiplexer to cause damage. Despite this switch's dual supply capability, its voltage should not exceed 22V. A total of SEPARATE OUTPUT outputs are available on this analog switch ic. The electrical part can be operated at 15V voltage levels.
ADG221KPZ Features
4 Channels
Switch Circuit: SPST - NC
ADG221KPZ Applications
There are a lot of Analog Devices Inc. ADG221KPZ Analog Switches & Multiplexers ICs applications.
- DVD-R
- Avionics
- New designs requiring multiplexer functions
- Digital Cross-Connects
- Cable Modem
- ATM
- Battery-powered systems
- DSUs
- Automatic test equipment
- High-Voltage
