ADG221KRZ
| Parameters | |
|---|---|
| Max Dual Supply Voltage | 22V |
| On-State Resistance (Max) | 90Ohm |
| High Level Output Current | 30mA |
| Dual Supply Voltage | 15V |
| Multiplexer/Demultiplexer Circuit | 1:1 |
| Off-state Isolation-Nom | 80 dB |
| Current - Leakage (IS(off)) (Max) | 2nA |
| Channel Capacitance (CS(off), CD(off)) | 5pF 5pF |
| On-state Resistance Match-Nom | 5Ohm |
| Switch Circuit | SPST - NC |
| Switch Time (Ton, Toff) (Max) | 350ns, 250ns |
| Charge Injection | 20pC |
| Channel-to-Channel Matching (ΔRon) | 4.5 Ω |
| Crosstalk | -80dB @ 100kHz |
| Switching | BREAK-BEFORE-MAKE |
| Normal Position | NC |
| Voltage - Supply, Dual (V±) | ±15V |
| Height | 1.5mm |
| Length | 10mm |
| Width | 4mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Contains Lead |
| Factory Lead Time | 1 Week |
| Lifecycle Status | PRODUCTION (Last Updated: 1 week ago) |
| Mounting Type | Surface Mount |
| Package / Case | 16-SOIC (0.154, 3.90mm Width) |
| Surface Mount | YES |
| Number of Pins | 16 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tube |
| JESD-609 Code | e3 |
| Pbfree Code | no |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Resistance | 90Ohm |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Multiplexer or Switches |
| Max Power Dissipation | 25.5mW |
| Technology | CMOS |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 4 |
| Supply Voltage | 15V |
| Terminal Pitch | 1.27mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | ADG221 |
| Pin Count | 16 |
| Operating Supply Voltage | 15V |
| Polarity | Non-Inverting |
| Number of Channels | 4 |
| Interface | Parallel |
| Max Supply Voltage | 25V |
| Operating Supply Current | 600μA |
| Nominal Supply Current | 1.5mA |
| Power Dissipation | 25.5mW |
| Max Supply Current | 1.5mA |
| Throw Configuration | SPST |
| Turn On Delay Time | 300 ns |
| Supply Type | Dual |
| Neg Supply Voltage-Nom (Vsup) | -15V |
| Turn-Off Delay Time | 250 ns |
ADG221KRZ Overview
This electronic part is conveniently packaged in 16-SOIC (0.154, 3.90mm Width), making it easy to ship abroad. This packaging method provides high reliability because it uses advanced packaging techniques. A switch device like this is mounted in Surface Mount. Multiplexers and demultiplexers have a number of circuits 1:1. Operation at a temperature around -40°C~85°C TA. In total, there have been 16 terminations. As a result of its 4 channels, this electronic component provides high-quality output. If the voltage supply is 15V volts, the electrical component should be turned on and run. Into the electrical component body are injected 16 pins. SPST - NC switching circuits are used in these analog switch ics. Try searching with ADG221 to find analog multiplexer variants. An switch multiplexer with 90Ohm internal resistance has a value of 90Ohm. You can find the functions of the 16 pins in the datasheets. This switch device is a typical Multiplexer or Switches. In a normalsituation, users should not supply the switches with voltage higher than 25V. Analogue multiplexer with a Dual supply type that is cost-effective. This digital switch can be operated with a current of 600μA. Put voltage above 1.5mA on the multiplexer to cause damage. If put voltage greater than 22V on the multiplexer, damage may be caused to the device. This electrical part is compatible with 15V operating voltages.
ADG221KRZ Features
4 Channels
Switch Circuit: SPST - NC
600μA Supply Current
ADG221KRZ Applications
There are a lot of Analog Devices Inc. ADG221KRZ Analog Switches & Multiplexers ICs applications.
- MP3 players
- Fault Tolerant Systems
- Cellular phones
- SDH/SONET multiplexers
- DSLAMs
- New designs requiring multiplexer functions
- Audio and video routing
- DVD-R
- PCMCIA cards
- Low-Voltage
