Parameters |
Factory Lead Time |
1 Week |
Lifecycle Status |
PRODUCTION (Last Updated: 1 week ago) |
Mounting Type |
Surface Mount |
Package / Case |
6-TSSOP, SC-88, SOT-363 |
Surface Mount |
YES |
Number of Pins |
6 |
Weight |
28.009329mg |
Operating Temperature |
-40°C~85°C |
Packaging |
Tape & Reel (TR) |
JESD-609 Code |
e4 |
Pbfree Code |
no |
Part Status |
Active |
Moisture Sensitivity Level (MSL) |
1 (Unlimited) |
Number of Terminations |
6 |
ECCN Code |
EAR99 |
Type |
Bus Switch |
Terminal Finish |
Nickel/Palladium/Gold (Ni/Pd/Au) |
Subcategory |
Bus Driver/Transceivers |
Technology |
CMOS |
Voltage - Supply |
2.5V 3.3V |
Terminal Position |
DUAL |
Terminal Form |
GULL WING |
Peak Reflow Temperature (Cel) |
260 |
Number of Functions |
1 |
Supply Voltage |
2.5V |
Time@Peak Reflow Temperature-Max (s) |
40 |
Base Part Number |
ADG3241 |
Pin Count |
6 |
Number of Elements |
1 |
Circuit |
1 x 1:1 |
Power Supplies |
2.5/3.3V |
Supply Voltage-Min (Vsup) |
2.3V |
Operating Supply Current |
1μA |
Number of Ports |
2 |
Number of Bits |
1 |
Throw Configuration |
SPST |
Propagation Delay |
225 ps |
Quiescent Current |
200μA |
Turn On Delay Time |
225 ps |
Logic Function |
Translator |
Data Rate |
1.5 Gbps |
Output Characteristics |
3-STATE |
Supply Type |
Single |
Bandwidth |
770MHz |
Output Polarity |
TRUE |
-3db Bandwidth |
770MHz |
High Level Output Current |
-25mA |
Low Level Output Current |
25mA |
Voltage Supply Source |
Single Supply |
Height |
1mm |
Length |
2.2mm |
Width |
1.35mm |
Radiation Hardening |
No |
REACH SVHC |
No SVHC |
RoHS Status |
ROHS3 Compliant |
Lead Free |
Contains Lead |
ADG3241BKSZ-500RL7 Overview
Due to the fact that it is provided in the 6-TSSOP, SC-88, SOT-363, digital switch allows the board to be compacted.In this case, it is packaged as Tape & Reel (TR).Digital switch ic uses a Surface Mount mounting method.Bus Switch is the analog IC that the multiplexers uses.As long as the operating temperature is -40°C~85°C, turn signal switch will not be influenced by external factors.Designers have greater flexibility when digital controlled switch operates at a 2.5V 3.3V supply voltage.As part of its basic configuration, 6 terminations are designed as a part of it.To find signal switch's related components, a base part number of ADG3241 may also be used.For multiplexer's system, a voltage of 2.5V is supplied.In this turn signal switch, there are 6 component pins.It employs GULL WING as the point at which conductors come to an end.The supply type of this multiplexer ic is Single.Currently, it is configured with a 6 pin configuration.In this signal multiplexer, there are 1 bits provided.Avoid unnecessary failures by keeping the supply voltage (Vsup) at 2.3V.mux switch's normal operation requires the power supply of 2.5/3.3V.In electronic terms, the digital switch ic is classified as part number Bus Driver/Transceivers.Without the influence of external factors, it consumes 200μA current of multiplexer ic.As far as the resistance is concerned, it operates with 2.Configuration elements for the mux switch consist of 1.In a load with a supply voltage of 1μA, stability of the multiplexers can be maintained.
ADG3241BKSZ-500RL7 Features
Supplied in the 6-TSSOP, SC-88, SOT-363 package
Adopting a supply type of Single
Power supplies of 2.5/3.3V
Operating with the supply current of 1μA
ADG3241BKSZ-500RL7 Applications
There are a lot of Analog Devices Inc. ADG3241BKSZ-500RL7 Signal Switches / Multiplexers / Decoders applications.
- LVDS
- War field flying robot with a night vision flying camera
- A/D converters
- Steel plants
- Enabling block of memory depending on address in memory chips
- Data-routing applications
- Enabling different functions units in microprocessor instruction decoding
- To select different task for memory in microprocessor memory systems
- Small scale TV wall
- Paper plants