ADG3241BKSZ-REEL7
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | PRODUCTION (Last Updated: 1 week ago) |
| Contact Plating | Gold |
| Mounting Type | Surface Mount |
| Package / Case | 6-TSSOP, SC-88, SOT-363 |
| Surface Mount | YES |
| Number of Pins | 6 |
| Weight | 28.009329mg |
| Operating Temperature | -40°C~85°C |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e4 |
| Pbfree Code | no |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 6 |
| ECCN Code | EAR99 |
| Type | Bus Switch |
| Resistance | 12Ohm |
| Subcategory | Bus Driver/Transceivers |
| Technology | CMOS |
| Voltage - Supply | 2.5V 3.3V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 2.5V |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | ADG3241 |
| Pin Count | 6 |
| Qualification Status | Not Qualified |
| Number of Elements | 1 |
| Circuit | 1 x 1:1 |
| Power Supplies | 2.5/3.3V |
| Supply Voltage-Min (Vsup) | 2.3V |
| Operating Supply Current | 1μA |
| Number of Ports | 2 |
| Number of Bits | 1 |
| Throw Configuration | SPST |
| Propagation Delay | 225 ps |
| Quiescent Current | 100μA |
| Turn On Delay Time | 4.6 ns |
| Data Rate | 1.5 Gbps |
| Output Characteristics | 3-STATE |
| Supply Type | Single |
| Bandwidth | 770MHz |
| Output Polarity | TRUE |
| -3db Bandwidth | 770MHz |
| High Level Output Current | -25mA |
| Low Level Output Current | 25mA |
| Voltage Supply Source | Single Supply |
| Length | 2mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Contains Lead |
ADG3241BKSZ-REEL7 Overview
Digital switch is provided in the 6-TSSOP, SC-88, SOT-363 for the purpose of saving board space.Tape & Reel (TR) is the packaging method.For mounting, digital switch ic uses the method Surface Mount.A digital IC Bus Switch is used as the analog component of the multiplexers.By maintaining the operating temperature at -40°C~85°C, turn signal switch will not be affected by external factors.Designers have greater flexibility when digital controlled switch operates at a 2.5V 3.3V supply voltage.Among its basic configurations are 6 terminations.In addition, it also has a base part number of ADG3241, which can be used to find related parts.In this case, 2.5V is the voltage supplied to the multiplexer's system.A component pin count of 6 can be found on this turn signal switch.It is the end of conductors that is represented by GULL WING.As a type of supply, Single is employed.A total of 6 pins are configured on this board.Signal multiplexer consists of 1 bits.Keep Vsup at 2.3V to avoid unnecessary failures.Normally, 2.5/3.3V is powered by a battery.The digital switch ic is an electronic part classified into Bus Driver/Transceivers.Without any external influences, it consumes 100μA current of multiplexer ic at all times.2 is the resistance at which it operates.With a resistance of 12Ohm, it operates.A configuration element for the mux switch consists of 1 elements.When 1μA is delivered to the load, stability of the multiplexers can be maintained.
ADG3241BKSZ-REEL7 Features
Supplied in the 6-TSSOP, SC-88, SOT-363 package
Adopting a supply type of Single
Power supplies of 2.5/3.3V
Operating with the supply current of 1μA
ADG3241BKSZ-REEL7 Applications
There are a lot of Analog Devices Inc. ADG3241BKSZ-REEL7 Signal Switches / Multiplexers / Decoders applications.
- Analog to digital conversion
- Encrypted communications system
- GLAN
- Relay
- Implementing boolean functions with multiple variables
- PCIe
- Data distribution
- Night vision cameras
- Data-routing applications
- Microprocessor input/output systems
