ADG3243BRJ-R2
| Parameters | |
|---|---|
| Contact Plating | Lead, Tin |
| Mounting Type | Surface Mount |
| Package / Case | SOT-23-8 |
| Surface Mount | YES |
| Number of Pins | 8 |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Type | Bus Switch |
| Resistance | 12Ohm |
| Max Operating Temperature | 85°C |
| Min Operating Temperature | -40°C |
| Subcategory | Bus Driver/Transceivers |
| Technology | CMOS |
| Voltage - Supply | 2.5V 3.3V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 240 |
| Number of Functions | 2 |
| Supply Voltage | 2.5V |
| Terminal Pitch | 0.65mm |
| Reach Compliance Code | not_compliant |
| Time@Peak Reflow Temperature-Max (s) | 20 |
| Base Part Number | ADG3243 |
| Pin Count | 8 |
| Qualification Status | Not Qualified |
| Number of Elements | 2 |
| Circuit | 1 x 1:1 |
| Supply Voltage-Max (Vsup) | 3.6V |
| Temperature Grade | INDUSTRIAL |
| Number of Ports | 2 |
| Nominal Supply Current | 1μA |
| Number of Bits | 1 |
| Throw Configuration | SPST |
| Propagation Delay | 225 ps |
| Quiescent Current | 1μA |
| Turn On Delay Time | 4.6 ns |
| Data Rate | 1.5 Gbps |
| Output Characteristics | 3-STATE |
| Supply Type | Single |
| Bandwidth | 710MHz |
| Output Polarity | TRUE |
| -3db Bandwidth | 710MHz |
| High Level Output Current | -25mA |
| Low Level Output Current | 25mA |
| Voltage Supply Source | Single Supply |
| Height Seated (Max) | 1.45mm |
| RoHS Status | Non-RoHS Compliant |
| Lead Free | Contains Lead |
ADG3243BRJ-R2 Overview
In order to save board space, digital switch is located in the SOT-23-8.The package is packaged in the manner of Tape & Reel (TR).Mounting is performed using Surface Mount.In the multiplexers, the analog IC Bus Switch is used.A supply voltage of 2.5V 3.3V provides digital controlled switch's superior flexibility for designers.The basic configuration includes 8 terminations.The base part number is ADG3243, which is also useful when looking up signal switch's related components.For multiplexer's system, 2.5V voltage is supplied.Signal switch has 8 component pins.GULL WING is used as the point at which the conductors come to an end as part of this formula.There is a supply type of Single employed as part of this supply.A configuration of 8 pins is used.As a result, signal multiplexer provides a total of 1 bits.Keeping Vsup at 3.6V will prevent some unnecessary failures.Bus Driver/Transceivers is the classification for this the digital switch ic.In the absence of external influences, it consumes 1μA current of multiplexer ic.The resistance of the signal switching is 2.The system operates with a resistance of 12Ohm.Signal switch operation at 85°C temperature is acceptable.In order to maintain a minimal operating temperature, the temperature of the multiplexer should be set to -40°C.The mux switch configuration contains 2 elements.
ADG3243BRJ-R2 Features
Supplied in the SOT-23-8 package
Adopting a supply type of Single
ADG3243BRJ-R2 Applications
There are a lot of Analog Devices Inc. ADG3243BRJ-R2 Signal Switches / Multiplexers / Decoders applications.
- Steel plants
- Telephone network
- War field flying robot with a night vision flying camera
- A robotic vehicle with the metal detector
- Logic gates for other digital devices
- Relay
- Time division multiplexing system
- Data-routing applications
- LVDS
- PCIe
