ADG3243BRJ-REEL7
| Parameters | |
|---|---|
| Contact Plating | Lead, Tin |
| Mounting Type | Surface Mount |
| Package / Case | SOT-23-8 |
| Surface Mount | YES |
| Number of Pins | 8 |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Type | Bus Switch |
| Resistance | 12Ohm |
| Max Operating Temperature | 85°C |
| Min Operating Temperature | -40°C |
| Subcategory | Bus Driver/Transceivers |
| Technology | CMOS |
| Voltage - Supply | 2.5V 3.3V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 240 |
| Number of Functions | 2 |
| Supply Voltage | 2.5V |
| Terminal Pitch | 0.65mm |
| Reach Compliance Code | not_compliant |
| Time@Peak Reflow Temperature-Max (s) | 20 |
| Base Part Number | ADG3243 |
| Pin Count | 8 |
| Qualification Status | Not Qualified |
| Number of Elements | 2 |
| Circuit | 1 x 1:1 |
| Supply Voltage-Max (Vsup) | 3.6V |
| Temperature Grade | INDUSTRIAL |
| Number of Ports | 2 |
| Nominal Supply Current | 1μA |
| Number of Bits | 1 |
| Throw Configuration | SPST |
| Propagation Delay | 225 ps |
| Quiescent Current | 1μA |
| Turn On Delay Time | 4.6 ns |
| Data Rate | 1.5 Gbps |
| Output Characteristics | 3-STATE |
| Supply Type | Single |
| Bandwidth | 710MHz |
| Output Polarity | TRUE |
| -3db Bandwidth | 710MHz |
| High Level Output Current | -25mA |
| Low Level Output Current | 25mA |
| Voltage Supply Source | Single Supply |
| Height Seated (Max) | 1.45mm |
| RoHS Status | Non-RoHS Compliant |
| Lead Free | Contains Lead |
ADG3243BRJ-REEL7 Overview
It is included in the SOT-23-8 in order to save board space.Tape & Reel (TR) represents its packaging.In terms of mounting, digital switch ic uses the method of Surface Mount.the multiplexers uses IC Bus Switch as the analog IC.It provides digital controlled switch's superior flexibility for designers to use when it operates with a supply voltage of 2.5V 3.3V.provides digital controlled switch's digital controlled switch'sThe basic configuration includes 8 terminations.The base part number is ADG3243, so you can find its logic switch related parts using that number.For multiplexer's system, a voltage of 2.5V is supplied.In this turn signal switch, there are 8 components that can be connected to each pin.A conductor terminates at GULL WING.As a type of supply, Single is employed.Currently, it is configured with 8 pins.Signal multiplexer contains 1 bits.It is advisable that the maximal supply voltage (Vsup) remains at 3.6V to avoid some unnecessary failures.In electronic terms, the digital switch ic is classified as Bus Driver/Transceivers.There are no external influences on this multiplexer ic, so it consumes 1μA current.The resistance is 2.The system operates with a resistance of 12Ohm.Signal switchs at temperatures up to 85°C are acceptable.It is recommended that the minimum operating temperature of the multiplexer be kept at -40°C.In mux switch configuration, there are 2 elements.
ADG3243BRJ-REEL7 Features
Supplied in the SOT-23-8 package
Adopting a supply type of Single
ADG3243BRJ-REEL7 Applications
There are a lot of Analog Devices Inc. ADG3243BRJ-REEL7 Signal Switches / Multiplexers / Decoders applications.
- Video transmission
- Logic gates for other digital devices
- Data bus control
- Enabling block of memory depending on address in memory chips
- CPU memory location identification
- Solenoid cooling fan
- Automatic Monitoring systems
- Microprocessor instruction decoding
- Electronic circuits
- Code converters
