ADG3243BRJZ-REEL7
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | PRODUCTION (Last Updated: 2 weeks ago) |
| Contact Plating | Tin |
| Mounting Type | Surface Mount |
| Package / Case | SOT-23-8 |
| Surface Mount | YES |
| Number of Pins | 8 |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e3 |
| Pbfree Code | no |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Type | Bus Switch |
| Resistance | 12Ohm |
| Max Operating Temperature | 85°C |
| Min Operating Temperature | -40°C |
| Technology | CMOS |
| Voltage - Supply | 2.5V 3.3V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 2 |
| Supply Voltage | 2.5V |
| Terminal Pitch | 0.65mm |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | ADG3243 |
| Pin Count | 8 |
| Qualification Status | Not Qualified |
| Number of Elements | 2 |
| Circuit | 1 x 1:1 |
| Supply Voltage-Max (Vsup) | 3.6V |
| Temperature Grade | INDUSTRIAL |
| Number of Ports | 2 |
| Nominal Supply Current | 1μA |
| Output Current | 25mA |
| Number of Bits | 1 |
| Throw Configuration | SPST |
| Propagation Delay | 225 ps |
| Quiescent Current | 1μA |
| Turn On Delay Time | 4.6 ns |
| Logic Function | Translator |
| Data Rate | 1.5 Gbps |
| Output Characteristics | 3-STATE |
| Supply Type | Single |
| Bandwidth | 710MHz |
| Output Polarity | TRUE |
| -3db Bandwidth | 710MHz |
| High Level Output Current | -25mA |
| Low Level Output Current | 25mA |
| Voltage Supply Source | Single Supply |
| Height Seated (Max) | 1.45mm |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Contains Lead |
ADG3243BRJZ-REEL7 Overview
In order to conserve board space, digital switch is included in the SOT-23-8.The package is packaged in the manner of Tape & Reel (TR).The method digital switch ic adopts for mounting is Surface Mount.the multiplexers uses IC Bus Switch as the analog IC.When digital controlled switch operates at 2.5V 3.3V, designers are provided with a greater degree of flexibility.It is designed with 8 terminations as part of its basic configuration.There is a base part number ADG3243 that can be used to locate signal switch's related components as well.The turn signal switch is supplied with a voltage of 2.5V volts.This turn signal switch has a total of 8 component pins.As the end of conductors, it uses GULL WING.The supply type of this multiplexer ic is Single.This multiplexer ic is configured with 8 pins.Signal multiplexer consists of 1 bits.Keeping Vsup at 3.6V will prevent some unnecessary failures.Without external influences, it consumes 1μA current of multiplexer ic.The system operates with a resistance of 2.The resistance of the signal switching is 12Ohm.It is acceptable for this signal switch to operate at the maximal temperature of 85°C.Keeping the temperature of the multiplexer at -40°C is the minimum operating temperature.It contains 2 elements in mux switch configuration.25mA provides a high degree of switches' flexibility.
ADG3243BRJZ-REEL7 Features
Supplied in the SOT-23-8 package
Adopting a supply type of Single
ADG3243BRJZ-REEL7 Applications
There are a lot of Analog Devices Inc. ADG3243BRJZ-REEL7 Signal Switches / Multiplexers / Decoders applications.
- Electronics industry
- RF-based home automation system
- High-performance memory systems
- Relay
- To select different devices in microprocessor input
- High-performance memory-decoding applications
- HDMI applications
- Solenoid cooling fan
- Enabling different rows of memory depending on address in memory chips
- Time division multiplexing system
