ADG3245BRU
| Parameters | |
|---|---|
| Contact Plating | Lead, Tin |
| Mounting Type | Surface Mount |
| Package / Case | 20-TSSOP (0.173, 4.40mm Width) |
| Surface Mount | YES |
| Number of Pins | 20 |
| Weight | 190.990737mg |
| Operating Temperature | -40°C~85°C |
| Packaging | Tube |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 20 |
| ECCN Code | EAR99 |
| Type | Bus Switch |
| Resistance | 15Ohm |
| Subcategory | Bus Driver/Transceivers |
| Technology | CMOS |
| Voltage - Supply | 2.3V~3.6V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 240 |
| Number of Functions | 1 |
| Supply Voltage | 2.5V |
| Terminal Pitch | 0.65mm |
| Reach Compliance Code | not_compliant |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | ADG3245 |
| Pin Count | 20 |
| Qualification Status | Not Qualified |
| Circuit | 8 x 1:1 |
| Supply Voltage-Max (Vsup) | 3.6V |
| Power Supplies | 2.5/3.3V |
| Supply Voltage-Min (Vsup) | 2.3V |
| Operating Supply Current | 1μA |
| Number of Ports | 2 |
| Number of Bits | 8 |
| Throw Configuration | SPST |
| Propagation Delay | 225 ps |
| Quiescent Current | 650μA |
| Turn On Delay Time | 4.8 ns |
| Data Rate | 1.244 Gbps |
| Output Characteristics | 3-STATE |
| Supply Type | Single |
| Bandwidth | 610MHz |
| Output Polarity | TRUE |
| -3db Bandwidth | 610MHz |
| High Level Output Current | -25mA |
| Low Level Output Current | 25mA |
| Voltage Supply Source | Single Supply |
| Independent Circuits | 1 |
| Length | 6.5mm |
| RoHS Status | Non-RoHS Compliant |
| Lead Free | Contains Lead |
ADG3245BRU Overview
Digital switch is provided in the 20-TSSOP (0.173, 4.40mm Width) for the purpose of saving board space.The package is packaged in accordance with Tube.In terms of mounting, digital switch ic uses the Surface Mount method .In the multiplexers, the analog IC is indicated by Bus Switch.By maintaining the operating temperature at -40°C~85°C, turn signal switch will not be affected by external factors.Designers have greater flexibility when digital controlled switch operates at a 2.3V~3.6V supply voltage.There are 20 terminations included in its basic configuration.As its base part number is ADG3245, logic switch can also be used to find its related parts.The multiplexer's system is powered by 2.5V volts.A component pin count of 20 can be found on this turn signal switch.It is the end of conductors that is represented by GULL WING.As a type of supply, Single is employed.Currently, it is configured with 20 pins.As a result, signal multiplexer provides a total of 8 bits.Keep Vsup at 2.3V to avoid unnecessary failures.To avoid unnecessary failures, the maximum supply voltage (Vsup) should be kept at 3.6V.During mux switch's normal operation, 2.5/3.3V is provided with a power supply.Part number Bus Driver/Transceivers indicates that the digital switch ic is an electronic part.Without any external influences, it consumes 650μA current of multiplexer ic at all times.The resistance is 2.A resistance of 15Ohm is used to operate the signal switching.When 1μA is delivered to the load, stability of the multiplexers can be maintained.
ADG3245BRU Features
Supplied in the 20-TSSOP (0.173, 4.40mm Width) package
Adopting a supply type of Single
Power supplies of 2.5/3.3V
Operating with the supply current of 1μA
ADG3245BRU Applications
There are a lot of Analog Devices Inc. ADG3245BRU Signal Switches / Multiplexers / Decoders applications.
- Memory system of computers
- Arithmetic Logic Units
- Data distribution
- Enabling block of memory depending on address in memory chips
- Computer memory
- Home automation system
- Logic circuits
- Medium scale TV wall
- CNC machines
- Video transmission
