ADG3245BRUZ
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | PRODUCTION (Last Updated: 1 week ago) |
| Contact Plating | Tin |
| Mounting Type | Surface Mount |
| Package / Case | 20-TSSOP (0.173, 4.40mm Width) |
| Surface Mount | YES |
| Number of Pins | 20 |
| Weight | 190.990737mg |
| Operating Temperature | -40°C~85°C |
| Packaging | Tube |
| JESD-609 Code | e3 |
| Pbfree Code | no |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 20 |
| ECCN Code | EAR99 |
| Type | Bus Switch |
| Resistance | 15Ohm |
| Technology | CMOS |
| Voltage - Supply | 2.3V~3.6V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 2.5V |
| Terminal Pitch | 0.65mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | ADG3245 |
| Pin Count | 20 |
| Circuit | 8 x 1:1 |
| Supply Voltage-Max (Vsup) | 3.6V |
| Supply Voltage-Min (Vsup) | 2.3V |
| Operating Supply Current | 1μA |
| Number of Ports | 2 |
| Number of Bits | 8 |
| Throw Configuration | SPST |
| Propagation Delay | 225 ps |
| Quiescent Current | 1.2mA |
| Turn On Delay Time | 4.8 ns |
| Logic Function | Translator |
| Data Rate | 1.244 Gbps |
| Number of Inputs | 1 |
| Output Characteristics | 3-STATE |
| Supply Type | Single |
| Bandwidth | 610MHz |
| Output Polarity | TRUE |
| -3db Bandwidth | 610MHz |
| High Level Output Current | -25mA |
| Low Level Output Current | 25mA |
| Voltage Supply Source | Single Supply |
| Height | 1.05mm |
| Length | 6.6mm |
| Width | 4.5mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Contains Lead |
ADG3245BRUZ Overview
In order to save board space, digital switch is located in the 20-TSSOP (0.173, 4.40mm Width).The package is packaged in the manner of Tube.For mounting, digital switch ic uses the method Surface Mount.As the analog part, the circuit uses an analog IC Bus Switch.If the operating temperature is maintained at -40°C~85°C, turn signal switch will not be susceptible to external factors.Designers have greater flexibility when digital controlled switch operates at a 2.3V~3.6V supply voltage.Among its basic configurations are 20 terminations.The base part number is ADG3245, which is also useful when looking up signal switch's related components.In this case, 2.5V is the voltage supplied to the multiplexer's system.This turn signal switch has 20 component pins.A conductor terminates at GULL WING.There is a type of supply Single that is employed in this case.The board has 20 pins configured.Signal multiplexer contains 8 bits.It is recommended that the minimum supply voltage (Vsup) be kept at 2.3V so that unnecessary failures can be prevented.It is advisable to keep the maximum supply voltage (Vsup) at 3.6V so as to avoid some unnecessary failures.In the absence of external influences, it consumes 1.2mA current of multiplexer ic.There are 1 inputs provided in this multiplexer.The resistance of the signal switching is 2.A resistance of 15Ohm is used to operate the signal switching.In a load with a supply voltage of 1μA, stability of the multiplexers can be maintained.
ADG3245BRUZ Features
Supplied in the 20-TSSOP (0.173, 4.40mm Width) package
Adopting a supply type of Single
Operating with the supply current of 1μA
ADG3245BRUZ Applications
There are a lot of Analog Devices Inc. ADG3245BRUZ Signal Switches / Multiplexers / Decoders applications.
- Signal router
- Electronic circuits
- Logic gates for other digital devices
- To select different devices in microprocessor input
- Time division multiplexing system
- Microprocessor instruction decoding
- Robotic vehicles
- Paper plants
- Data bus control
- Small scale TV wall
