ADG3245BRUZ-REEL7
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | PRODUCTION (Last Updated: 1 week ago) |
| Contact Plating | Tin |
| Mounting Type | Surface Mount |
| Package / Case | 20-TSSOP (0.173, 4.40mm Width) |
| Surface Mount | YES |
| Number of Pins | 20 |
| Weight | 190.990737mg |
| Operating Temperature | -40°C~85°C |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e3 |
| Pbfree Code | no |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 20 |
| ECCN Code | EAR99 |
| Type | Bus Switch |
| Resistance | 15Ohm |
| Technology | CMOS |
| Voltage - Supply | 2.3V~3.6V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 2.5V |
| Terminal Pitch | 0.65mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | ADG3245 |
| Pin Count | 20 |
| Qualification Status | Not Qualified |
| Circuit | 8 x 1:1 |
| Supply Voltage-Max (Vsup) | 3.6V |
| Supply Voltage-Min (Vsup) | 2.3V |
| Operating Supply Current | 1μA |
| Number of Ports | 2 |
| Number of Bits | 8 |
| Throw Configuration | SPST |
| Propagation Delay | 225 ps |
| Quiescent Current | 650μA |
| Turn On Delay Time | 4.8 ns |
| Data Rate | 1.244 Gbps |
| Output Characteristics | 3-STATE |
| Supply Type | Single |
| Bandwidth | 610MHz |
| Output Polarity | TRUE |
| -3db Bandwidth | 610MHz |
| High Level Output Current | -25mA |
| Low Level Output Current | 25mA |
| Voltage Supply Source | Single Supply |
| Independent Circuits | 1 |
| Length | 6.5mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Contains Lead |
ADG3245BRUZ-REEL7 Overview
Due to the fact that it is provided in the 20-TSSOP (0.173, 4.40mm Width), digital switch allows the board to be compacted.Tape & Reel (TR) is the packaging method.Digital switch ic adheres to a mounting method of Surface Mount.Bus Switch is the analog IC that the multiplexers uses.As long as the operating temperature is -40°C~85°C, turn signal switch will not be influenced by external factors.Using a 2.3V~3.6V supply voltage provides digital controlled switch's superior flexibility for designers.The basic configuration of this system includes 20 terminations.As its base part number is ADG3245, logic switch can also be used to find its related parts.The multiplexer's system is supplied with a voltage of 2.5V.A component pin count of 20 is found on this turn signal switch.It employs GULL WING as the point at which conductors come to an end.Single is employed as its supply type.A configuration of 20 pins is used.As a result, signal multiplexer provides 8 bits.Keep Vsup at 2.3V to avoid unnecessary failures.It is advisable that the maximal supply voltage (Vsup) remains at 3.6V to avoid some unnecessary failures.No external influence consumes 650μA current of multiplexer ic.The resistance of the signal switching is 2.This signal switching operates at a resistance of 15Ohm.Providing the load with a supply voltage of 1μA can maintain stability of the multiplexers.
ADG3245BRUZ-REEL7 Features
Supplied in the 20-TSSOP (0.173, 4.40mm Width) package
Adopting a supply type of Single
Operating with the supply current of 1μA
ADG3245BRUZ-REEL7 Applications
There are a lot of Analog Devices Inc. ADG3245BRUZ-REEL7 Signal Switches / Multiplexers / Decoders applications.
- VGA
- Computer memory
- PCIe
- Electronics industry
- Microprocessor input/output systems
- CPU memory location identification
- High-performance memory-decoding applications
- Recording transmission
- A robotic vehicle with the metal detector
- Data transfer
