Parameters |
Contact Plating |
Tin |
Mounting Type |
Surface Mount |
Package / Case |
24-TSSOP (0.173, 4.40mm Width) |
Surface Mount |
YES |
Number of Pins |
24 |
Weight |
211.997734mg |
Operating Temperature |
-40°C~85°C |
Packaging |
Tube |
JESD-609 Code |
e3 |
Pbfree Code |
yes |
Part Status |
Obsolete |
Moisture Sensitivity Level (MSL) |
1 (Unlimited) |
Number of Terminations |
24 |
ECCN Code |
EAR99 |
Type |
Bus Switch |
Resistance |
15Ohm |
Subcategory |
Bus Driver/Transceiver |
Technology |
CMOS |
Voltage - Supply |
2.5V 3.3V |
Terminal Position |
DUAL |
Terminal Form |
GULL WING |
Peak Reflow Temperature (Cel) |
260 |
Number of Functions |
1 |
Supply Voltage |
2.5V |
Terminal Pitch |
0.65mm |
Time@Peak Reflow Temperature-Max (s) |
40 |
Base Part Number |
ADG3246 |
Pin Count |
24 |
Circuit |
10 x 1:1 |
Supply Voltage-Max (Vsup) |
3.6V |
Power Supplies |
2.5/3.3V |
Supply Voltage-Min (Vsup) |
2.3V |
Operating Supply Current |
1μA |
Number of Ports |
2 |
Output Current |
25mA |
Number of Bits |
10 |
Throw Configuration |
SPST |
Propagation Delay |
225 ps |
Quiescent Current |
1.2mA |
Turn On Delay Time |
4.8 ns |
Logic Function |
Translator |
Output Characteristics |
3-STATE |
Supply Type |
Single |
Output Polarity |
TRUE |
High Level Output Current |
-25mA |
Low Level Output Current |
25mA |
Voltage Supply Source |
Single Supply |
Independent Circuits |
1 |
Length |
7.8mm |
Width |
4.4mm |
Radiation Hardening |
No |
REACH SVHC |
No SVHC |
RoHS Status |
ROHS3 Compliant |
Lead Free |
Contains Lead |
ADG3246BRUZ Overview
This is a relatively small item of digital switch that is included in the 24-TSSOP (0.173, 4.40mm Width) in order to save space on the board.As a result, it is packaged in a way that is referred to as Tube.In terms of mounting, digital switch ic uses the Surface Mount method .the multiplexers uses IC Bus Switch as the analog IC.As long as the operating temperature is -40°C~85°C, turn signal switch will not be influenced by external factors.It provides digital controlled switch's superior flexibility for designers to use when it operates with a supply voltage of 2.5V 3.3V.provides digital controlled switch's digital controlled switch'sThere are 24 terminations included in its basic configuration.The part number for ADG3246 can be used to find its logic switch related parts as well.For multiplexer's system, 2.5V voltage is supplied.A component pin count of 24 can be found on this turn signal switch.GULL WING represents the end of conductors.There is a supply type of Single employed as part of this supply.Currently, it is configured with 24 pins.Signal multiplexer consists of 10 bits.Avoid unnecessary failures by keeping the supply voltage (Vsup) at 2.3V.It is advisable to keep the maximum supply voltage (Vsup) at 3.6V so as to avoid some unnecessary failures.There is a power supply provided for the mux switch's normal operation of 2.5/3.3V.This is an the digital switch ic that is classified as Bus Driver/Transceiver.Without any external influences, it consumes 1.2mA current of multiplexer ic at all times.2 ports are used for some other peripheral signal switchings to plug in.In terms of resistance, it has a value of 15Ohm.For increased switches' flexibility, the output current of 25mA is provided.It is possible to maintain stability of the multiplexers if the supply voltage to the load is set at 1μA.
ADG3246BRUZ Features
Supplied in the 24-TSSOP (0.173, 4.40mm Width) package
Adopting a supply type of Single
Power supplies of 2.5/3.3V
Operating with the supply current of 1μA
ADG3246BRUZ Applications
There are a lot of Analog Devices Inc. ADG3246BRUZ Signal Switches / Multiplexers / Decoders applications.
- Data bus control
- Home automation system
- Solenoid cooling fan
- Enabling different functions units in microprocessor instruction decoding
- Data communication
- Transmission from the computer system of a satellite
- Signal router
- Recording transmission
- Logic gates for other digital devices
- Small scale TV wall