ADG3246BRUZ-REEL7
| Parameters | |
|---|---|
| Contact Plating | Tin |
| Mounting Type | Surface Mount |
| Package / Case | 24-TSSOP (0.173, 4.40mm Width) |
| Surface Mount | YES |
| Number of Pins | 24 |
| Weight | 211.997734mg |
| Operating Temperature | -40°C~85°C |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 24 |
| ECCN Code | EAR99 |
| Type | Bus Switch |
| Resistance | 15Ohm |
| Technology | CMOS |
| Voltage - Supply | 2.5V 3.3V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 10 |
| Supply Voltage | 2.5V |
| Terminal Pitch | 0.65mm |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | ADG3246 |
| Pin Count | 24 |
| Circuit | 10 x 1:1 |
| Supply Voltage-Max (Vsup) | 3.6V |
| Supply Voltage-Min (Vsup) | 2.3V |
| Operating Supply Current | 1μA |
| Number of Ports | 2 |
| Number of Bits | 10 |
| Throw Configuration | SPST |
| Propagation Delay | 225 ps |
| Quiescent Current | 650μA |
| Turn On Delay Time | 4.8 ns |
| Output Characteristics | 3-STATE |
| Supply Type | Single |
| Output Polarity | TRUE |
| High Level Output Current | -25mA |
| Low Level Output Current | 25mA |
| Voltage Supply Source | Single Supply |
| Independent Circuits | 1 |
| Length | 7.8mm |
| Width | 4.4mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Contains Lead |
ADG3246BRUZ-REEL7 Overview
Due to the lack of space on the board, digital switch is provided in the 24-TSSOP (0.173, 4.40mm Width).It is packaged according to the Tape & Reel (TR) method.Mounting is performed using Surface Mount.the multiplexers uses IC Bus Switch as the analog IC.The operating temperature of -40°C~85°C will not be susceptible to external factors.Using a 2.5V 3.3V supply voltage provides digital controlled switch's superior flexibility for designers.There are 24 terminations included in its basic configuration.Its logic switch base part number is ADG3246 which can also be used to find its logic switch related parts.The multiplexer's system is powered by 2.5V volts.This turn signal switch contains 24 component pins.As the end of conductors, it uses GULL WING.Single is employed as its supply type.It is configured with 24 pins.Signal multiplexer consists of 10 bits.It is recommended that the minimum supply voltage (Vsup) be kept at 2.3V to avoid some unnecessary failures.Vsup (maximum supply voltage) should be kept as 3.6V to prevent unnecessary failures.It consumes 650μA current of multiplexer ic without external influences.The resistance of the signal switching is 2.In terms of resistance, it has a value of 15Ohm.If the load is supplied with a voltage of 1μA, stability of the multiplexers can be maintained.
ADG3246BRUZ-REEL7 Features
Supplied in the 24-TSSOP (0.173, 4.40mm Width) package
Adopting a supply type of Single
Operating with the supply current of 1μA
ADG3246BRUZ-REEL7 Applications
There are a lot of Analog Devices Inc. ADG3246BRUZ-REEL7 Signal Switches / Multiplexers / Decoders applications.
- Enabling different rows of memory depending on address in memory chips
- Paper plants
- Make half adder
- Logic gates for other digital devices
- Robotic vehicles
- To select different task for memory in microprocessor memory systems
- HD surveillance system
- CPU memory location identification
- Logic circuits
- High-performance memory systems
