ADG3247BRU
| Parameters | |
|---|---|
| Contact Plating | Lead, Tin |
| Mounting Type | Surface Mount |
| Package / Case | 38-TFSOP (0.173, 4.40mm Width) |
| Surface Mount | YES |
| Number of Pins | 38 |
| Weight | 203.804722mg |
| Packaging | Tube |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 38 |
| ECCN Code | EAR99 |
| Type | Bus Switch |
| Resistance | 15Ohm |
| Terminal Finish | Tin/Lead (Sn85Pb15) |
| Max Operating Temperature | 85°C |
| Min Operating Temperature | -40°C |
| Subcategory | Bus Driver/Transceiver |
| Technology | CMOS |
| Voltage - Supply | 2.5V 3.3V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 240 |
| Number of Functions | 2 |
| Supply Voltage | 2.5V |
| Terminal Pitch | 0.5mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | ADG3247 |
| Pin Count | 38 |
| Circuit | 8 x 1:1 |
| Supply Voltage-Max (Vsup) | 3.6V |
| Temperature Grade | INDUSTRIAL |
| Operating Supply Current | 1μA |
| Number of Ports | 2 |
| Number of Bits | 16 |
| Throw Configuration | SPST |
| Propagation Delay | 225 ps |
| Quiescent Current | 1.2mA |
| Turn On Delay Time | 4.8 ns |
| Output Characteristics | 3-STATE |
| Supply Type | Single |
| Output Polarity | TRUE |
| High Level Output Current | -25mA |
| Low Level Output Current | 25mA |
| Voltage Supply Source | Single Supply |
| Independent Circuits | 2 |
| Length | 9.7mm |
| Width | 4.4mm |
| Radiation Hardening | No |
| RoHS Status | Non-RoHS Compliant |
| Lead Free | Contains Lead |
ADG3247BRU Overview
It is included in the 38-TFSOP (0.173, 4.40mm Width) in order to save board space.Tube represents its packaging.Digital switch ic uses a Surface Mount mounting method.In the multiplexers, the analog IC Bus Switch is used.A supply voltage of 2.5V 3.3V provides digital controlled switch's superior flexibility for designers.Among its basic features are 38 terminations.To find signal switch's related components, a base part number of ADG3247 may also be used.For multiplexer's system, 2.5V voltage is supplied.This turn signal switch has 38 component pins.It is the end of conductors that is represented by GULL WING.There is a type of supply of Single.Currently, it is configured with 38 pins.There are 16 bits signal multiplexer provides.It is advisable to keep the maximum supply voltage (Vsup) at 3.6V so as to avoid some unnecessary failures.The digital switch ic is a part of an electronic system classified as Bus Driver/Transceiver.It consumes 1.2mA current of multiplexer ic without external influences.This signal switching operates at a resistance of 2.In terms of resistance, it has a value of 15Ohm.85°C is an acceptable maximum temperature for this signal switch.Ideally, the temperature of the multiplexer should not exceed -40°C.Stability of the multiplexers can be kept when the supply voltage of 1μA is delivered to the load.
ADG3247BRU Features
Supplied in the 38-TFSOP (0.173, 4.40mm Width) package
Adopting a supply type of Single
Operating with the supply current of 1μA
ADG3247BRU Applications
There are a lot of Analog Devices Inc. ADG3247BRU Signal Switches / Multiplexers / Decoders applications.
- Enabling different functions units in microprocessor instruction decoding
- HDMI applications
- Relay
- Signal router
- VGA
- Time division multiplexing system
- Data transfer
- Frequency multiplexing system
- Data communication
- Electronics industry
