ADG3247BRU-REEL7
| Parameters | |
|---|---|
| Contact Plating | Lead, Tin |
| Mounting Type | Surface Mount |
| Package / Case | 38-TFSOP (0.173, 4.40mm Width) |
| Surface Mount | YES |
| Number of Pins | 38 |
| Weight | 203.804722mg |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 38 |
| ECCN Code | EAR99 |
| Type | Bus Switch |
| Resistance | 15Ohm |
| Terminal Finish | Tin/Lead (Sn85Pb15) |
| Max Operating Temperature | 85°C |
| Min Operating Temperature | -40°C |
| Subcategory | Bus Driver/Transceiver |
| Technology | CMOS |
| Voltage - Supply | 2.5V 3.3V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 240 |
| Number of Functions | 2 |
| Supply Voltage | 2.5V |
| Terminal Pitch | 0.5mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | ADG3247 |
| Pin Count | 38 |
| Circuit | 8 x 1:1 |
| Supply Voltage-Max (Vsup) | 3.6V |
| Temperature Grade | INDUSTRIAL |
| Operating Supply Current | 1μA |
| Number of Ports | 2 |
| Number of Bits | 16 |
| Throw Configuration | SPST |
| Propagation Delay | 225 ps |
| Quiescent Current | 1.2mA |
| Turn On Delay Time | 4.8 ns |
| Output Characteristics | 3-STATE |
| Supply Type | Single |
| Output Polarity | TRUE |
| High Level Output Current | -25mA |
| Low Level Output Current | 25mA |
| Voltage Supply Source | Single Supply |
| Independent Circuits | 2 |
| Length | 9.7mm |
| Width | 4.4mm |
| Radiation Hardening | No |
| RoHS Status | Non-RoHS Compliant |
| Lead Free | Contains Lead |
ADG3247BRU-REEL7 Overview
This is a relatively small item of digital switch that is included in the 38-TFSOP (0.173, 4.40mm Width) in order to save space on the board.The package is packaged in the manner of Tape & Reel (TR).For mounting, digital switch ic uses the method Surface Mount.the multiplexers uses an analog IC Bus Switch.When digital controlled switch operates at 2.5V 3.3V, designers have superior flexibility.There is a design for terminating 38 as part of its basic configuration.The base part number is ADG3247, which is also useful when looking up signal switch's related components.For multiplexer's system, 2.5V voltage is supplied.Signal switch has 38 component pins.Using the point GULL WING as an end point of conductors, it is used to determine the terminus of a conductor.As a type of supply, Single is employed.This multiplexer ic has 38 pins configured.As a result, signal multiplexer provides 16 bits.Keeping Vsup at 3.6V will prevent some unnecessary failures.This is a signal switch that is categorized as Bus Driver/Transceiver.Without any external influences, it consumes 1.2mA current of multiplexer ic at all times.The resistance of the signal switching is 2.The system operates with a resistance of 15Ohm.The signal switch can operate at a maximum temperature of 85°C.A temperature of the multiplexer of -40°C should be maintained for minimal operation.Load stability of the multiplexers can be maintained by delivering 1μA supply voltage.
ADG3247BRU-REEL7 Features
Supplied in the 38-TFSOP (0.173, 4.40mm Width) package
Adopting a supply type of Single
Operating with the supply current of 1μA
ADG3247BRU-REEL7 Applications
There are a lot of Analog Devices Inc. ADG3247BRU-REEL7 Signal Switches / Multiplexers / Decoders applications.
- Recording transmission
- Medical industry
- War field flying robot with a night vision flying camera
- Used to connect a single source to multiple destinations
- PCIe
- To select different devices in microprocessor output
- Speed control of medern motors
- Enabling different functions units in microprocessor instruction decoding
- Metal detectors
- Speed synchronization of multiple motors in industries
