ADG3257BRQ
| Parameters | |
|---|---|
| Contact Plating | Lead, Tin |
| Mounting Type | Surface Mount |
| Package / Case | 16-SSOP (0.154, 3.90mm Width) |
| Surface Mount | YES |
| Number of Pins | 16 |
| Operating Temperature | -40°C~85°C |
| Packaging | Tube |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Type | Multiplexer/Demultiplexer |
| Resistance | 4.5Ohm |
| Subcategory | Other Logic ICs |
| Technology | CMOS |
| Voltage - Supply | 3V~3.6V 4.5V~5.5V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 240 |
| Number of Functions | 1 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.635mm |
| Reach Compliance Code | not_compliant |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | ADG3257 |
| Pin Count | 16 |
| Number of Outputs | 1 |
| Qualification Status | Not Qualified |
| Operating Supply Voltage | 5V |
| Circuit | 4 x 2:1 |
| Supply Voltage-Max (Vsup) | 3.63V |
| Supply Voltage-Min (Vsup) | 2.97V |
| Number of Channels | 4 |
| Max Supply Current | 1μA |
| Number of Bits | 8 |
| Throw Configuration | DPST |
| Propagation Delay | 100 ps |
| Quiescent Current | 1nA |
| Turn On Delay Time | 9 ns |
| Logic Function | Demultiplexer, Multiplexer |
| Data Rate | 933 Mbps |
| Output Characteristics | 3-STATE |
| Supply Type | Single |
| Bandwidth | 610MHz |
| Output Polarity | TRUE |
| -3db Bandwidth | 610MHz |
| High Level Output Current | -100mA |
| Low Level Output Current | 100mA |
| Voltage Supply Source | Single Supply |
| Independent Circuits | 1 |
| RoHS Status | Non-RoHS Compliant |
| Lead Free | Contains Lead |
ADG3257BRQ Overview
For the purpose of saving board space, digital switch is included in the 16-SSOP (0.154, 3.90mm Width).In this case, it is packaged as Tube.For mounting, digital switch ic uses the method Surface Mount.A digital IC Multiplexer/Demultiplexer is used as the analog component of the multiplexers.When the operating temperature is kept at -40°C~85°C, turn signal switch will not be susceptible to external factors.Design engineers have more flexibility when digital controlled switch operates at 3V~3.6V 4.5V~5.5V voltage.Its basic configuration includes terminations in the 16 range.There is a base part number of ADG3257 which can also be used in order to locate the logic switch that are related to this item.The multiplexer is supplied with 3.3V voltage.This turn signal switch has a total of 16 component pins.As a result, GULL WING represents the end of the conductors.In this case, Single is employed as the supply type.It is configured with 16 pins.Signal multiplexer provides 8 bits.It is recommended that the minimum supply voltage (Vsup) be kept at 2.97V to avoid some unnecessary failures.To avoid unnecessary failures, the maximum supply voltage (Vsup) should be kept at 3.63V.The turn signal switch has 1 outputs.Part number Other Logic ICs indicates that the digital switch ic is an electronic part.Without the influence of external factors, it consumes 1nA current of multiplexer ic.Using a supply voltage of 5V can result in reliable performance of the multiplexers.With a resistance of 4.5Ohm, it operates.A total of 4 transmission channels are available in the turn signal switch's circuit.
ADG3257BRQ Features
Supplied in the 16-SSOP (0.154, 3.90mm Width) package
Adopting a supply type of Single
Operating with the supply voltage of 5V
ADG3257BRQ Applications
There are a lot of Analog Devices Inc. ADG3257BRQ Signal Switches / Multiplexers / Decoders applications.
- Home automation system
- To select different devices in microprocessor input
- Data communication
- Video transmission
- Idle motor
- Automatic health monitoring systems
- Night vision cameras
- Microprocessor input/output systems
- Microprocessor instruction decoding
- Automatic Monitoring systems
