ADG3257BRQ-REEL
| Parameters | |
|---|---|
| Peak Reflow Temperature (Cel) | 240 |
| Number of Functions | 4 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.635mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | ADG3257 |
| Pin Count | 16 |
| Number of Outputs | 2 |
| Operating Supply Voltage | 5V |
| Circuit | 4 x 2:1 |
| Supply Voltage-Min (Vsup) | 3V |
| Number of Channels | 4 |
| Max Supply Current | 1μA |
| Number of Bits | 8 |
| Throw Configuration | DPST |
| Propagation Delay | 100 ps |
| Quiescent Current | 1μA |
| Turn On Delay Time | 9 ns |
| Logic Function | Demultiplexer, Multiplexer |
| Output Characteristics | 3-STATE |
| Supply Type | Single |
| Output Polarity | TRUE |
| High Level Output Current | -100mA |
| Low Level Output Current | 100mA |
| Voltage Supply Source | Single Supply |
| Independent Circuits | 1 |
| Radiation Hardening | No |
| RoHS Status | Non-RoHS Compliant |
| Lead Free | Contains Lead |
| Contact Plating | Lead, Tin |
| Mounting Type | Surface Mount |
| Package / Case | 16-SSOP (0.154, 3.90mm Width) |
| Surface Mount | YES |
| Number of Pins | 16 |
| Operating Temperature | -40°C~85°C |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Type | Multiplexer/Demultiplexer |
| Resistance | 4.5Ohm |
| Technology | CMOS |
| Voltage - Supply | 3V~3.6V 4.5V~5.5V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
ADG3257BRQ-REEL Overview
This is a relatively small item of digital switch that is included in the 16-SSOP (0.154, 3.90mm Width) in order to save space on the board.Tape & Reel (TR) is the packaging method.In terms of mounting, digital switch ic uses the method of Surface Mount.A digital IC Multiplexer/Demultiplexer is used as the analog component of the multiplexers.If the operating temperature is maintained at -40°C~85°C, turn signal switch will not be susceptible to external factors.The turn signal switch is designed for use with a 3V~3.6V 4.5V~5.5V supply voltage, which gives it a lot of flexibility.Among its basic configurations are 16 terminations.The base part number is ADG3257, which can also be used to find its logic switch related parts.The turn signal switch is supplied with a voltage of 3.3V volts.In this turn signal switch, there are 16 component pins.It employs GULL WING as the point at which conductors come to an end.There is a type of supply of Single.This multiplexer ic is configured with 16 pins.As a result, signal multiplexer provides 8 bits.Vsup should be kept at 3V to prevent some unnecessary failures.The turn signal switch has 2 outputs designed for operation.Despite not interacting with external factors, it consumes 1μA current of multiplexer ic.Supply voltages of 5V can provide reliable performance of the multiplexers.4.5Ohm is the resistance at which it operates.The turn signal switch's circuit has 4 transmission channels.
ADG3257BRQ-REEL Features
Supplied in the 16-SSOP (0.154, 3.90mm Width) package
Adopting a supply type of Single
Operating with the supply voltage of 5V
ADG3257BRQ-REEL Applications
There are a lot of Analog Devices Inc. ADG3257BRQ-REEL Signal Switches / Multiplexers / Decoders applications.
- Recording transmission
- Robotic vehicles
- Data demultiplexing
- Injectors
- Data collection system
- Logic gates for other digital devices
- Microprocessor memory systems
- Relay
- Memory system of computers
- HD surveillance system
