ADG333ABNZ
| Parameters | |
|---|---|
| Height | 3.3mm |
| Length | 26.16mm |
| Width | 6.35mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Contains Lead |
| Factory Lead Time | 1 Week |
| Lifecycle Status | PRODUCTION (Last Updated: 1 month ago) |
| Contact Plating | Tin |
| Mounting Type | Through Hole |
| Package / Case | 20-DIP (0.300, 7.62mm) |
| Surface Mount | NO |
| Number of Pins | 20 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tube |
| JESD-609 Code | e3 |
| Pbfree Code | no |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 20 |
| ECCN Code | EAR99 |
| Resistance | 45Ohm |
| Max Power Dissipation | 3.77mW |
| Technology | BICMOS |
| Number of Functions | 4 |
| Supply Voltage | 15V |
| Base Part Number | ADG333 |
| Pin Count | 20 |
| Number of Outputs | 8 |
| Operating Supply Voltage | 12V |
| Polarity | Non-Inverting |
| Number of Channels | 4 |
| Interface | Parallel |
| Max Supply Voltage | 30V |
| Min Supply Voltage | 3V |
| Test Frequency | 1MHz |
| Power Dissipation | 3.77mW |
| Max Supply Current | 250μA |
| Turn On Delay Time | 175 ns |
| Voltage - Supply, Single/Dual (±) | 3V~30V ±3V~20V |
| Supply Type | Dual, Single |
| Neg Supply Voltage-Nom (Vsup) | -15V |
| Turn-Off Delay Time | 145 ns |
| Max Dual Supply Voltage | 20V |
| On-State Resistance (Max) | 45Ohm |
| Min Dual Supply Voltage | 3V |
| High Level Output Current | 20mA |
| Dual Supply Voltage | 15V |
| Multiplexer/Demultiplexer Circuit | 2:1 |
| Off-state Isolation-Nom | 72 dB |
| Current - Leakage (IS(off)) (Max) | 250pA |
| Channel Capacitance (CS(off), CD(off)) | 7pF |
| On-state Resistance Match-Nom | 4Ohm |
| Switch Circuit | SPDT |
| Switch Time (Ton, Toff) (Max) | 90ns, 80ns (Typ) |
| Charge Injection | 2pC |
| Channel-to-Channel Matching (ΔRon) | 5 Ω |
| Crosstalk | -85dB @ 1MHz |
| Drain to Source Resistance | 20mOhm |
ADG333ABNZ Overview
The electrical component comes in 20-DIP (0.300, 7.62mm) packaging, which makes it convenient to ship overseas. This high-reliability packaging method uses advanced packaging methods Tube. In Through Hole, you'll find this switch device. Multiplexers and demultiplexers have a number of circuits 2:1. Temperatures around -40°C~85°C TA are extended for operation. 20 terminations have been made so far. A 4 channel electronic part produces high-quality output. When a voltage supply of 15V is used, the electronic component should be turned on and run. Electronic part bodies are injected with 20 pins. A SPDT switching circuit is used to build these analog multiplexers. Try searching with ADG333 if you're looking for variants. As far as internal resistance is concerned, it has 45Ohm. You can find the functions of the 20 pins in the datasheets. An abnormal situation would be for the switch device to be supplied with a voltage greater than 30V. Analog switch ics with Dual, Single supply type are cost-effective. 3V should be the lowest voltage fed to the electronic component. The switch multiplexer may be damaged if it is exposed to voltage greater than 250μA. For this switch, a dual supply voltage is feasible, but it must not exceed 20VYou should attach at least 3V voltage if you are using dual power supply. The electronic component can function from 12V. Drain to Source resistance for this electronic component is 20mOhm. There are 8 outputs on the analogue multiplexer.
ADG333ABNZ Features
4 Channels
Switch Circuit: SPDT
Drain-to-Source resistance: 20mOhm
ADG333ABNZ Applications
There are a lot of Analog Devices Inc. ADG333ABNZ Analog Switches & Multiplexers ICs applications.
- E1 Multiplexer
- ADCs such as AD7840/8, AD7870/1/2/4/5/6/8
- SDH/SONET multiplexers
- PBX interfaces
- High-Voltage
- Battery Powered Systems
- Industrial control systems
- Audio and video routing
- Avionics and Military Systems
- Public switching systems
