ADG333ABRZ-REEL

90ns, 80ns (Typ) SPDT 45Ohm Analog Switches BREAK-BEFORE-MAKE ADG333 20 Pins 250pA 15V 20-SOIC (0.295, 7.50mm Width)

Manufacturer: Analog Devices Inc.
Nocochips NO: 84-ADG333ABRZ-REEL
Package: 20-SOIC (0.295, 7.50mm Width)
Datasheet: PDF
Stock: 391
Description: 90ns, 80ns (Typ) SPDT 45Ohm Analog Switches BREAK-BEFORE-MAKE ADG333 20 Pins 250pA 15V 20-SOIC (0.295, 7.50mm Width)(Kg)

Details

Tags

Parameters
Factory Lead Time	1 Week
Lifecycle Status	PRODUCTION (Last Updated: 1 week ago)
Mounting Type	Surface Mount
Package / Case	20-SOIC (0.295, 7.50mm Width)
Surface Mount	YES
Number of Pins	20
Operating Temperature	-40°C~85°C TA
Packaging	Tape & Reel (TR)
JESD-609 Code	e3
Pbfree Code	no
Part Status	Active
Moisture Sensitivity Level (MSL)	1 (Unlimited)
Number of Terminations	20
ECCN Code	EAR99
Resistance	45Ohm
Terminal Finish	Matte Tin (Sn)
Subcategory	Multiplexer or Switches
Max Power Dissipation	3.77mW
Technology	BICMOS
Terminal Form	GULL WING
Peak Reflow Temperature (Cel)	260
Number of Functions	4
Supply Voltage	15V
Terminal Pitch	1.27mm
Time@Peak Reflow Temperature-Max (s)	40
Base Part Number	ADG333
Pin Count	20
Number of Outputs	8
Qualification Status	Not Qualified
Operating Supply Voltage	12V
Number of Channels	4
Interface	Parallel
Max Supply Voltage	30V
Min Supply Voltage	3V
Test Frequency	1MHz
Operating Supply Current	50nA
Power Dissipation	3.77mW
Max Supply Current	250μA
Turn On Delay Time	175 ns
Voltage - Supply, Single/Dual (±)	3V~30V ±3V~20V
Supply Type	Dual, Single
Neg Supply Voltage-Nom (Vsup)	-15V
Turn-Off Delay Time	145 ns
Max Dual Supply Voltage	20V
On-State Resistance (Max)	45Ohm
Min Dual Supply Voltage	3V
Dual Supply Voltage	15V
Multiplexer/Demultiplexer Circuit	2:1
Off-state Isolation-Nom	72 dB
Current - Leakage (IS(off)) (Max)	250pA
Channel Capacitance (CS(off), CD(off))	7pF
On-state Resistance Match-Nom	4Ohm
Switch Circuit	SPDT
Switch Time (Ton, Toff) (Max)	90ns, 80ns (Typ)
Charge Injection	2pC
Channel-to-Channel Matching (ΔRon)	5 Ω
Crosstalk	-85dB @ 1MHz
Switching	BREAK-BEFORE-MAKE
Height Seated (Max)	2.65mm
Width	7.5mm
RoHS Status	ROHS3 Compliant
Lead Free	Contains Lead

ADG333ABRZ-REEL Overview

The electronic part can be shipped overseas conveniently because it is packaged in 20-SOIC (0.295, 7.50mm Width). A high level of reliability can be achieved through the use of an advanced packaging method Tape & Reel (TR). Surface Mount is where this multiplexer is located. Multiplexers and demultiplexers have a ratio of 2:1. Increasing operating temperature to around -40°C~85°C TA. A total of 20 terminations have been recorded. A electrical component with 4 channels is capable of high-quality output. An 15V voltage supply should allow the electrical part to be turned on and run. An electrical component like this is included in the 20 series. A SPDT switching circuit is used for these analog switches. Try searching with ADG333 if you're looking for variants. There is 45Ohm internal resistance in this digital multiplexer. To find out what the functions of 20 pins are, please refer to their datasheets. The analog multiplexer shown here is a typical Multiplexer or Switches. An abnormal situation would be for the switch device to be supplied with a voltage greater than 30V. The digital multiplexer has a low cost Dual, Single supply. A low voltage of 3V should be applied to the electronic component. It would be sufficient to run this analogue multiplexer with 50nA current. Putting voltage greater than 250μA on the multiplexer may cause damage. Despite this switch's dual supply capability, its voltage should not exceed 20V. In the case of dual power supplies, you should connect at least 3V. 12V operating voltages can be used with this electrical part. 8 outputs are included in the analogue multiplexer.