ADG407BP-REEL
| Parameters | |
|---|---|
| Mounting Type | Surface Mount |
| Package / Case | 28-LCC (J-Lead) |
| Surface Mount | YES |
| Number of Pins | 28 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 28 |
| ECCN Code | EAR99 |
| Resistance | 80Ohm |
| Subcategory | Multiplexer or Switches |
| Max Power Dissipation | 3.1mW |
| Technology | BICMOS |
| Terminal Position | QUAD |
| Terminal Form | J BEND |
| Peak Reflow Temperature (Cel) | 225 |
| Number of Functions | 1 |
| Supply Voltage | 15V |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | ADG407 |
| Pin Count | 28 |
| Operating Supply Voltage | 12V |
| Supply Voltage-Min (Vsup) | 13.5V |
| Number of Channels | 8 |
| Number of Circuits | 2 |
| Max Supply Voltage | 25V |
| Analog IC - Other Type | DIFFERENTIAL MULTIPLEXER |
| Power Dissipation | 3.1mW |
| Number of Inputs | 16 |
| Neg Supply Voltage-Nom (Vsup) | -15V |
| Turn-Off Delay Time | 110 ns |
| Max Dual Supply Voltage | 22V |
| On-State Resistance (Max) | 80Ohm |
| Dual Supply Voltage | 15V |
| Multiplexer/Demultiplexer Circuit | 8:1 |
| Off-state Isolation-Nom | 75 dB |
| Current - Leakage (IS(off)) (Max) | 500pA |
| Channel Capacitance (CS(off), CD(off)) | 5pF 25pF |
| On-state Resistance Match-Nom | 4Ohm |
| Switch Time (Ton, Toff) (Max) | 160ns, 150ns |
| Charge Injection | 8pC |
| Channel-to-Channel Matching (ΔRon) | 4 Ω |
| Crosstalk | -85dB @ 100kHz |
| Switching | BREAK-BEFORE-MAKE |
| Switch-on Time-Max | 150ns |
| Switch-off Time-Max | 150ns |
| Neg Supply Voltage-Min (Vsup) | -13.5V |
| Voltage - Supply, Dual (V±) | ±15V |
| Height Seated (Max) | 4.57mm |
| Length | 11.505mm |
| Width | 11.505mm |
| Radiation Hardening | No |
| RoHS Status | Non-RoHS Compliant |
| Lead Free | Contains Lead |
ADG407BP-REEL Overview
The electronic part can be shipped overseas conveniently because it is packaged in 28-LCC (J-Lead). This high-reliability packaging method uses advanced packaging methods Tape & Reel (TR). Mounted in Surface Mount is this multiplexer. Multiplexers and demultiplexers have a ratio of 8:1. Operation at a temperature around -40°C~85°C TA. In total, 28 terminations have occurred. Due to its 8 channels, the electrical component produces high-quality output. When a voltage supply of 15V is used, the electronic component should be turned on and run. An electrical component of this type can be found in the 28 series. 2 circuits are used in this analogue multiplexer. ADG407 can be used to search for analog multiplexer variants. Internally, this switch multiplexer has a resistance of 80Ohm. For functions related to 28 pins, please refer to the datasheets. A analogue multiplexer of this type is a Multiplexer or Switches. In normalcircumstances, users should not exceed 25V volts for the multiplexer. There's no problem with dual supply voltage for this switch device. However, it shouldn't exceed 22V. This product is integrated with an analog integrated circuit (IC) of type DIFFERENTIAL MULTIPLEXER. Operating voltages range from 12V. Operating the 16 inputs requires 16 inputs. To power the multiplexer ics, the voltage must be set at 13.5V.
ADG407BP-REEL Features
8 Channels
ADG407BP-REEL Applications
There are a lot of Analog Devices Inc. ADG407BP-REEL Analog Switches & Multiplexers ICs applications.
- Automotive applications
- Power routing
- Multiplexers
- Medical
- Medical systems
- Residential Gateways, Home Gateway/Router
- Relay replacements
- Cellular phones
- Video signal routing
- Switching Systems
