Parameters |
Mounting Type |
Surface Mount |
Package / Case |
16-SOIC (0.154, 3.90mm Width) |
Surface Mount |
YES |
Number of Pins |
16 |
Operating Temperature |
-40°C~85°C TA |
Packaging |
Tube |
JESD-609 Code |
e0 |
Pbfree Code |
no |
Part Status |
Obsolete |
Moisture Sensitivity Level (MSL) |
1 (Unlimited) |
Number of Terminations |
16 |
ECCN Code |
EAR99 |
Resistance |
100Ohm |
Subcategory |
Multiplexer or Switches |
Max Power Dissipation |
600mW |
Technology |
CMOS |
Terminal Position |
DUAL |
Terminal Form |
GULL WING |
Peak Reflow Temperature (Cel) |
235 |
Number of Functions |
1 |
Supply Voltage |
15V |
Time@Peak Reflow Temperature-Max (s) |
20 |
Base Part Number |
ADG408 |
Pin Count |
16 |
Operating Supply Voltage |
12V |
Number of Channels |
8 |
Interface |
Parallel |
Number of Circuits |
1 |
Max Supply Voltage |
32V |
Min Supply Voltage |
5V |
Analog IC - Other Type |
SINGLE-ENDED MULTIPLEXER |
Operating Supply Current |
100μA |
Nominal Supply Current |
100μA |
Power Dissipation |
3.1mW |
Max Supply Current |
200μA |
Throw Configuration |
DPST |
Propagation Delay |
130 ns |
Turn On Delay Time |
140 ns |
Number of Inputs |
8 |
Neg Supply Voltage-Nom (Vsup) |
-15V |
Turn-Off Delay Time |
60 ns |
Max Dual Supply Voltage |
22V |
On-State Resistance (Max) |
100Ohm |
High Level Output Current |
20mA |
Dual Supply Voltage |
15V |
Multiplexer/Demultiplexer Circuit |
8:1 |
Off-state Isolation-Nom |
75 dB |
Current - Leakage (IS(off)) (Max) |
500pA |
Channel Capacitance (CS(off), CD(off)) |
11pF 40pF |
On-state Resistance Match-Nom |
15Ohm |
Charge Injection |
20pC |
Channel-to-Channel Matching (ΔRon) |
15 Ω (Max) |
Crosstalk |
-85dB @ 100kHz |
Switching |
BREAK-BEFORE-MAKE |
Signal Current-Max |
0.02A |
Voltage - Supply, Dual (V±) |
±15V |
Height |
1.5mm |
Length |
10mm |
Width |
4mm |
Radiation Hardening |
No |
REACH SVHC |
No SVHC |
RoHS Status |
Non-RoHS Compliant |
Lead Free |
Contains Lead |
ADG408BR Overview
The electronic part can be shipped overseas conveniently because it is packaged in 16-SOIC (0.154, 3.90mm Width). In order to provide high reliability, an advanced packaging method Tube is used. There is an analog multiplexer mounted in position Surface Mount. In the multiplexer and demultiplexer, 8:1 represents the number of circuits. Extended operating temperature around -40°C~85°C TA. There are 16 terminations totally. The electronic part provides high-quality output because it has 8 channels. It is safe to turn on and run the electronic component with a 15V voltage supply. A total of 16 pins are injected into the body of the electronic part. This multiplexer is composed of 1 circuits. If you are looking for variants of the digital switch, trying search with ADG408. Analog switches have 100Ohm internal resistance. Datasheets for 16 pin functions are available upon request. There is Multiplexer or Switches analog multiplexer like this in the world. Users shouldn't supply more than 32V voltage to the switch device. It is recommended that the electrical component receives a voltage of 5V. The switch device would be able to operate with 100μA current. The switch multiplexer may be damaged if it is exposed to voltage greater than 200μA. Despite this switch's dual supply capability, its voltage should not exceed 22V. A SINGLE-ENDED MULTIPLEXER analog IC is integrated into the board. The electronic component can function from 12V. The 8 inputs need to be operated in order to work.
ADG408BR Features
8 Channels
100μA Supply Current
ADG408BR Applications
There are a lot of Analog Devices Inc. ADG408BR Analog Switches & Multiplexers ICs applications.
- Precision data acquisition
- Video signal routing
- Microwave transmission systems
- Precision test equipment
- Cable Modem
- Industrial
- Ultrasound
- Transmit
- Microprocessor Controlled Analog Systems
- High-Voltage