ADG408BR-REEL
| Parameters | |
|---|---|
| Contact Plating | Lead, Tin |
| Mounting Type | Surface Mount |
| Package / Case | 16-SOIC (0.154, 3.90mm Width) |
| Surface Mount | YES |
| Number of Pins | 16 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Resistance | 100Ohm |
| Max Power Dissipation | 600mW |
| Technology | CMOS |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 240 |
| Number of Functions | 1 |
| Supply Voltage | 15V |
| Reach Compliance Code | not_compliant |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | ADG408 |
| Pin Count | 16 |
| Qualification Status | Not Qualified |
| Operating Supply Voltage | 12V |
| Number of Channels | 8 |
| Interface | Parallel |
| Number of Circuits | 1 |
| Max Supply Voltage | 32V |
| Operating Supply Current | 100μA |
| Power Dissipation | 3.1mW |
| Throw Configuration | DPST |
| Propagation Delay | 130 ns |
| Turn On Delay Time | 150 ns |
| Logic Function | Multiplexer |
| Supply Type | Dual, Single |
| Supply Current-Max (Isup) | 2mA |
| Neg Supply Voltage-Nom (Vsup) | -15V |
| Turn-Off Delay Time | 60 ns |
| Max Dual Supply Voltage | 22V |
| On-State Resistance (Max) | 100Ohm |
| High Level Output Current | 20mA |
| Dual Supply Voltage | 15V |
| Multiplexer/Demultiplexer Circuit | 8:1 |
| Off-state Isolation-Nom | 75 dB |
| Current - Leakage (IS(off)) (Max) | 500pA |
| Channel Capacitance (CS(off), CD(off)) | 11pF 40pF |
| On-state Resistance Match-Nom | 15Ohm |
| Charge Injection | 20pC |
| Channel-to-Channel Matching (ΔRon) | 15 Ω (Max) |
| Crosstalk | -85dB @ 100kHz |
| Switching | BREAK-BEFORE-MAKE |
| Signal Current-Max | 0.02A |
| Voltage - Supply, Dual (V±) | ±15V |
| Length | 9.9mm |
| Width | 3.9mm |
| RoHS Status | Non-RoHS Compliant |
| Lead Free | Contains Lead |
ADG408BR-REEL Overview
As the electronic part is packed in 16-SOIC (0.154, 3.90mm Width), international shipping is convenient. Advanced packaging method Tape & Reel (TR) is used to provide high reliability. There is an analog multiplexer mounted in position Surface Mount. Multiplexers and demultiplexers have a ratio of 8:1. An extended operating temperature of -40°C~85°C TA degrees Celsius. A total of 16 terminations have been recorded. This electronic part offers high-quality output due to its 8 channels. Powered by a 15V voltage supply, the electrical part should be switched on and run. An electrical component like this is included in the 16 series. There are 1 circuits in this switch device. If you are looking for variants of the digital switch, trying search with ADG408. This digital multiplexer has 100Ohm internal resistance. Datasheets for 16 pin functions are available upon request. In normalcircumstances, users should not exceed 32V volts for the multiplexer. Digital switch that provides Dual, Single power at a cost-effective price. 100μA current would be enough for this multiplexer to operate. Despite this switch's dual supply capability, its voltage should not exceed 22V. There is a voltage range of 12V operating voltages for the electrical part.
ADG408BR-REEL Features
8 Channels
100μA Supply Current
ADG408BR-REEL Applications
There are a lot of Analog Devices Inc. ADG408BR-REEL Analog Switches & Multiplexers ICs applications.
- Power routing
- Short/Medium Loop: approximately 2000 ft. of 26 AWG and 5 REN loads
- Industrial
- Sample hold systems
- Remote Powered Equipment
- Access Concentrators
- CSU
- Precision data acquisition
- Battery Powered Systems
- Digital access cross connects
