ADG408BRUZ

100Ohm DUAL Analog Switches BREAK-BEFORE-MAKE ADG408 16 Pins 500pA 15V 16-TSSOP (0.173, 4.40mm Width)

Manufacturer: Analog Devices Inc.
Nocochips NO: 84-ADG408BRUZ
Package: 16-TSSOP (0.173, 4.40mm Width)
Datasheet: PDF
Stock: 848
Description: 100Ohm DUAL Analog Switches BREAK-BEFORE-MAKE ADG408 16 Pins 500pA 15V 16-TSSOP (0.173, 4.40mm Width)(Kg)

Details

Tags

Parameters
Factory Lead Time	1 Week
Lifecycle Status	PRODUCTION (Last Updated: 1 week ago)
Contact Plating	Tin
Mount	Surface Mount
Mounting Type	Surface Mount
Package / Case	16-TSSOP (0.173, 4.40mm Width)
Number of Pins	16
Operating Temperature	-40°C~85°C TA
Packaging	Tube
JESD-609 Code	e3
Pbfree Code	no
Part Status	Active
Moisture Sensitivity Level (MSL)	1 (Unlimited)
Number of Terminations	16
ECCN Code	EAR99
Resistance	100Ohm
Subcategory	Multiplexer or Switches
Max Power Dissipation	450mW
Technology	CMOS
Terminal Position	DUAL
Terminal Form	GULL WING
Peak Reflow Temperature (Cel)	260
Number of Functions	1
Supply Voltage	15V
Time@Peak Reflow Temperature-Max (s)	30
Base Part Number	ADG408
Pin Count	16
Operating Supply Voltage	12V
Number of Channels	8
Interface	Parallel
Number of Circuits	1
Max Supply Voltage	32V
Min Supply Voltage	5V
Analog IC - Other Type	SINGLE-ENDED MULTIPLEXER
Operating Supply Current	100μA
Nominal Supply Current	100μA
Power Dissipation	3.1mW
Max Supply Current	200μA
Throw Configuration	DPST
Propagation Delay	130 ns
Turn On Delay Time	225 ns
Number of Inputs	8
Neg Supply Voltage-Nom (Vsup)	-15V
Turn-Off Delay Time	150 ns
Max Dual Supply Voltage	22V
On-State Resistance (Max)	100Ohm
High Level Output Current	20mA
Dual Supply Voltage	15V
Multiplexer/Demultiplexer Circuit	8:1
Off-state Isolation-Nom	75 dB
Current - Leakage (IS(off)) (Max)	500pA
Channel Capacitance (CS(off), CD(off))	11pF 40pF
On-state Resistance Match-Nom	15Ohm
Charge Injection	20pC
Channel-to-Channel Matching (ΔRon)	15 Ω (Max)
Crosstalk	-85dB @ 100kHz
Switching	BREAK-BEFORE-MAKE
Drain to Source Resistance	40Ohm
Signal Current-Max	0.02A
Voltage - Supply, Dual (V±)	±15V
Height	1.05mm
Length	5mm
Width	4.4mm
Radiation Hardening	No
REACH SVHC	No SVHC
RoHS Status	ROHS3 Compliant
Lead Free	Contains Lead

ADG408BRUZ Overview

As the electronic part is packed in 16-TSSOP (0.173, 4.40mm Width), international shipping is convenient. In order to provide high reliability, an advanced packaging method Tube is used. There is an analog multiplexer mounted in position Surface Mount. 8:1 is the ratio between multiplexers and demultiplexers. Increasing operating temperature to around -40°C~85°C TA. In total, there are 16 terminations. High-quality output is provided by the electronic component's 8 channels. Turning on and running the electrical part should be easy with a 15V voltage supply. An injection of 16 pins is performed into the body of the electrical component. There are 1 circuits in this multiplexer. Using the ADG408 search parameter, you can discover variants of the switch. This digital multiplexer has 100Ohm internal resistance. You can find the functions of the 16 pins in the datasheets. It is a typical Multiplexer or Switches analog multiplexer. In a normalsituation, users should not supply the switches with voltage higher than 32V. 5V is the lowest voltage the electrical component should receive. In order to operate this switch device, it would need a current of 100μA. Put voltage above 200μA on the multiplexer to cause damage. Despite this switch device's dual supply capability, its voltage should not exceed 22V. There is an integrated analog IC SINGLE-ENDED MULTIPLEXER in the module. 12V operating voltages can be used with this electrical part. A 8 input needs to be operated. Drain to Source resistance for this electronic component is 40Ohm.