ADG408BRUZ-REEL
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | PRODUCTION (Last Updated: 3 months ago) |
| Contact Plating | Tin |
| Mounting Type | Surface Mount |
| Package / Case | 16-TSSOP (0.173, 4.40mm Width) |
| Surface Mount | YES |
| Number of Pins | 16 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e3 |
| Pbfree Code | no |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Resistance | 100Ohm |
| Max Power Dissipation | 450mW |
| Technology | CMOS |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 15V |
| Terminal Pitch | 0.65mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | ADG408 |
| Pin Count | 16 |
| Qualification Status | Not Qualified |
| Operating Supply Voltage | 12V |
| Number of Channels | 8 |
| Interface | Parallel |
| Number of Circuits | 1 |
| Max Supply Voltage | 32V |
| Operating Supply Current | 100μA |
| Power Dissipation | 3.1mW |
| Throw Configuration | DPST |
| Propagation Delay | 130 ns |
| Turn On Delay Time | 150 ns |
| Logic Function | Multiplexer |
| Number of Inputs | 8 |
| Supply Type | Dual, Single |
| Supply Current-Max (Isup) | 0.5mA |
| Neg Supply Voltage-Nom (Vsup) | -15V |
| Turn-Off Delay Time | 60 ns |
| Max Dual Supply Voltage | 22V |
| On-State Resistance (Max) | 100Ohm |
| High Level Output Current | 20mA |
| Dual Supply Voltage | 15V |
| Multiplexer/Demultiplexer Circuit | 8:1 |
| Off-state Isolation-Nom | 75 dB |
| Current - Leakage (IS(off)) (Max) | 500pA |
| Channel Capacitance (CS(off), CD(off)) | 11pF 40pF |
| On-state Resistance Match-Nom | 15Ohm |
| Charge Injection | 20pC |
| Channel-to-Channel Matching (ΔRon) | 15 Ω (Max) |
| Crosstalk | -85dB @ 100kHz |
| Switching | BREAK-BEFORE-MAKE |
| Voltage - Supply, Dual (V±) | ±15V |
| Length | 5mm |
| Width | 4.4mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Contains Lead |
ADG408BRUZ-REEL Overview
This electronic part is conveniently packaged in 16-TSSOP (0.173, 4.40mm Width), making it easy to ship abroad. This packaging method provides high reliability because it uses advanced packaging techniques. There is an analog multiplexer mounted in position Surface Mount. There is 8:1 ratio between the number of multiplexers and demultiplexers. Operation at a temperature around -40°C~85°C TA. In total, 16 terminations have occurred. A high-quality output is provided by the electrical component's 8 channels. An 15V voltage supply should allow the electrical part to be turned on and run. 16 pins are injected to the electronic part body. There are 1 circuits in this switch device. Search with ADG408 if you are looking for analog multiplexer variants. This digital multiplexer has 100Ohm internal resistance. Please refer to the datasheets for 16 pins functions. It is generally not recommended to supply a voltage higher than 32V to the switch device in normal circumstances. The digital multiplexer has a low cost Dual, Single supply. For this digital switch to work, 100μA current would suffice. It is possible to supply this switch device with dual voltages. However, it is not advisable to exceed 22V. Operating voltages range from 12V. Operating the 8 inputs requires 8 inputs.
ADG408BRUZ-REEL Features
8 Channels
100μA Supply Current
ADG408BRUZ-REEL Applications
There are a lot of Analog Devices Inc. ADG408BRUZ-REEL Analog Switches & Multiplexers ICs applications.
- ADCs such as AD7840/8, AD7870/1/2/4/5/6/8
- Precision instrumentation
- Digital cross connects (DSX-1)
- Battery Powered Instruments
- Microprocessor controlled systems
- Channelized and Unchannelized DS3 applications
- Digital Cross-Connects
- HDTV
- FTTH
- DSUs
