ADG408BRUZ-REEL7
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | PRODUCTION (Last Updated: 3 months ago) |
| Contact Plating | Tin |
| Mounting Type | Surface Mount |
| Package / Case | 16-TSSOP (0.173, 4.40mm Width) |
| Surface Mount | YES |
| Number of Pins | 16 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e3 |
| Pbfree Code | no |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Resistance | 100Ohm |
| Max Power Dissipation | 450mW |
| Technology | CMOS |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 15V |
| Terminal Pitch | 0.65mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | ADG408 |
| Pin Count | 16 |
| Qualification Status | Not Qualified |
| Operating Supply Voltage | 12V |
| Number of Channels | 8 |
| Interface | Parallel |
| Number of Circuits | 1 |
| Max Supply Voltage | 32V |
| Operating Supply Current | 100μA |
| Power Dissipation | 3.1mW |
| Throw Configuration | DPST |
| Propagation Delay | 130 ns |
| Turn On Delay Time | 150 ns |
| Logic Function | Multiplexer |
| Number of Inputs | 8 |
| Supply Type | Dual, Single |
| Supply Current-Max (Isup) | 0.5mA |
| Neg Supply Voltage-Nom (Vsup) | -15V |
| Turn-Off Delay Time | 60 ns |
| Max Dual Supply Voltage | 22V |
| On-State Resistance (Max) | 100Ohm |
| High Level Output Current | 20mA |
| Dual Supply Voltage | 15V |
| Multiplexer/Demultiplexer Circuit | 8:1 |
| Off-state Isolation-Nom | 75 dB |
| Current - Leakage (IS(off)) (Max) | 500pA |
| Channel Capacitance (CS(off), CD(off)) | 11pF 40pF |
| On-state Resistance Match-Nom | 15Ohm |
| Charge Injection | 20pC |
| Channel-to-Channel Matching (ΔRon) | 15 Ω (Max) |
| Crosstalk | -85dB @ 100kHz |
| Switching | BREAK-BEFORE-MAKE |
| Voltage - Supply, Dual (V±) | ±15V |
| Length | 5mm |
| Width | 4.4mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Contains Lead |
ADG408BRUZ-REEL7 Overview
The electrical component comes in 16-TSSOP (0.173, 4.40mm Width) packaging, which makes it convenient to ship overseas. To ensure high reliability, a new packaging method Tape & Reel (TR) is used. Surface Mount is where this multiplexer is located. There is 8:1 ratio between the number of multiplexers and demultiplexers. An extended operating temperature of -40°C~85°C TA degrees Celsius. In total, there are 16 terminations. As a result of its 8 channels, this electronic component provides high-quality output. When a voltage supply of 15V is used, the electronic component should be turned on and run. The electronic part body is injected with 16 pins. This multiplexer is composed of 1 circuits. Try searching with ADG408 if you're looking for variants. Analog switches have 100Ohm internal resistance. To find out what the functions of 16 pins are, please refer to their datasheets. It is normally recommended that users do not supply the multiplexer with voltages higher than 32V. Dual, Single supply type digital switch with a low cost. The switch device would be able to operate with 100μA current. For this switch device, it is feasible to have two supplies. However, the voltage should not exceed 22V. This electrical part is compatible with 12V operating voltages. It is possible to operate 8 inputs.
ADG408BRUZ-REEL7 Features
8 Channels
100μA Supply Current
ADG408BRUZ-REEL7 Applications
There are a lot of Analog Devices Inc. ADG408BRUZ-REEL7 Analog Switches & Multiplexers ICs applications.
- Precision instrumentation
- Residential Gateways, Home Gateway/Router
- Industrial control systems
- Relay Replacement
- Multi-Line E1 Interface Cards
- PCMCIA cards
- E1 Multiplexer
- Microwave transmission systems
- Central office
- Channelized and Unchannelized DS3 applications
