ADG409BR-REEL
| Parameters | |
|---|---|
| Mounting Type | Surface Mount |
| Package / Case | 16-SOIC (0.154, 3.90mm Width) |
| Surface Mount | YES |
| Number of Pins | 16 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Resistance | 100Ohm |
| Max Power Dissipation | 600mW |
| Technology | CMOS |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 240 |
| Number of Functions | 1 |
| Supply Voltage | 15V |
| Reach Compliance Code | not_compliant |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | ADG409 |
| Pin Count | 16 |
| Qualification Status | Not Qualified |
| Operating Supply Voltage | 12V |
| Number of Channels | 4 |
| Number of Circuits | 2 |
| Max Supply Voltage | 32V |
| Operating Supply Current | 100μA |
| Power Dissipation | 3.1mW |
| Throw Configuration | 4PST |
| Propagation Delay | 130 ns |
| Turn On Delay Time | 150 ns |
| Logic Function | Multiplexer |
| Number of Inputs | 8 |
| Supply Type | Dual, Single |
| Neg Supply Voltage-Nom (Vsup) | -15V |
| Turn-Off Delay Time | 60 ns |
| Max Dual Supply Voltage | 22V |
| On-State Resistance (Max) | 100Ohm |
| Dual Supply Voltage | 15V |
| Multiplexer/Demultiplexer Circuit | 4:1 |
| Off-state Isolation-Nom | 75 dB |
| Current - Leakage (IS(off)) (Max) | 500pA |
| Channel Capacitance (CS(off), CD(off)) | 11pF 20pF |
| On-state Resistance Match-Nom | 15Ohm |
| Switch Circuit | SP4T |
| Charge Injection | 20pC |
| Channel-to-Channel Matching (ΔRon) | 15 Ω (Max) |
| Crosstalk | -85dB @ 100kHz |
| Switching | BREAK-BEFORE-MAKE |
| Voltage - Supply, Dual (V±) | ±15V |
| Height Seated (Max) | 1.75mm |
| Length | 9.9mm |
| Width | 3.9mm |
| RoHS Status | Non-RoHS Compliant |
| Lead Free | Contains Lead |
ADG409BR-REEL Overview
The electrical component comes in 16-SOIC (0.154, 3.90mm Width) packaging, which makes it convenient to ship overseas. High reliability is achieved by using advanced packaging method Tape & Reel (TR). In Surface Mount, this analog switch is mounted. There is 4:1 ratio between the number of multiplexers and demultiplexers. Operational temperature extended around -40°C~85°C TA. The total number of terminations is 16. Due to its 4 channels, the electrical component produces high-quality output. Turning on and running the electrical part should be easy with a 15V voltage supply. Into the electrical component body are injected 16 pins. Multiplexers built on a SP4T switching circuit are built. A total of 2 circuits make up this switch device. If you are looking for variants of the digital switch, trying search with ADG409. The internal resistance of this digital multiplexer is 100Ohm. To find out what the functions of 16 pins are, please refer to their datasheets. Users should never supply a voltage higher than 32V to a switch device. Analogue multiplexer with a Dual, Single supply type that is cost-effective. In order to operate this switch device, it would need a current of 100μA. For this switch, a dual supply voltage is feasible, but it must not exceed 22VOperating voltages range from 12V. The 8 inputs need to be operated in order to work.
ADG409BR-REEL Features
4 Channels
Switch Circuit: SP4T
100μA Supply Current
ADG409BR-REEL Applications
There are a lot of Analog Devices Inc. ADG409BR-REEL Analog Switches & Multiplexers ICs applications.
- Power routing
- Battery Powered Systems
- Battery Powered Instruments
- Audio and video signal routing
- Multiplexers
- SDH
- Cable Modem
- Channelized and Unchannelized DS3 applications
- High-Voltage
- Automotive applications
