ADG409BR-REEL7
| Parameters | |
|---|---|
| Mounting Type | Surface Mount |
| Package / Case | 16-SOIC (0.154, 3.90mm Width) |
| Surface Mount | YES |
| Number of Pins | 16 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Resistance | 100Ohm |
| Max Power Dissipation | 600mW |
| Technology | CMOS |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 240 |
| Number of Functions | 1 |
| Supply Voltage | 15V |
| Reach Compliance Code | not_compliant |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | ADG409 |
| Pin Count | 16 |
| Qualification Status | Not Qualified |
| Operating Supply Voltage | 12V |
| Number of Channels | 4 |
| Interface | Parallel |
| Number of Circuits | 2 |
| Max Supply Voltage | 32V |
| Operating Supply Current | 100μA |
| Power Dissipation | 3.1mW |
| Throw Configuration | 4PST |
| Propagation Delay | 130 ns |
| Turn On Delay Time | 150 ns |
| Logic Function | Multiplexer |
| Number of Inputs | 8 |
| Supply Type | Dual, Single |
| Neg Supply Voltage-Nom (Vsup) | -15V |
| Turn-Off Delay Time | 60 ns |
| Max Dual Supply Voltage | 22V |
| On-State Resistance (Max) | 100Ohm |
| Dual Supply Voltage | 15V |
| Multiplexer/Demultiplexer Circuit | 4:1 |
| Off-state Isolation-Nom | 75 dB |
| Current - Leakage (IS(off)) (Max) | 500pA |
| Channel Capacitance (CS(off), CD(off)) | 11pF 20pF |
| On-state Resistance Match-Nom | 15Ohm |
| Switch Circuit | SP4T |
| Charge Injection | 20pC |
| Channel-to-Channel Matching (ΔRon) | 15 Ω (Max) |
| Crosstalk | -85dB @ 100kHz |
| Switching | BREAK-BEFORE-MAKE |
| Voltage - Supply, Dual (V±) | ±15V |
| Height Seated (Max) | 1.75mm |
| Length | 9.9mm |
| Width | 3.9mm |
| RoHS Status | Non-RoHS Compliant |
| Lead Free | Contains Lead |
ADG409BR-REEL7 Overview
Presented in 16-SOIC (0.154, 3.90mm Width), this electrical component is convenient for overseas shipping. The advanced packaging method Tape & Reel (TR) provides high reliability. Surface Mount is where this multiplexer is located. Multiplexers and demultiplexers have a number of circuits 4:1. Operating temperature around -40°C~85°C TA extended. Totally, there are 16 terminations. A high-quality output is provided by the electrical component's 4 channels. With a 15V voltage supply, the electrical component should be turned on and run. Electronic part bodies are injected with 16 pins. Based on SP4T switching circuits, these analog multiplexers work. There are 2 circuits in this multiplexer. Using the ADG409 search parameter, you can discover variants of the switch. Internally, this switch multiplexer has a resistance of 100Ohm. Datasheets for functions of 16 pins are available. It is generally not recommended to supply a voltage higher than 32V to the switch device in normal circumstances. The analog switch ic is of the Dual, Single supply type and is cost-effective. The analogue multiplexer could operate on 100μA current. If put voltage greater than 22V on the multiplexer, damage may be caused to the device. Operating voltages range from 12V. In order to operate the 8 inputs, there are several steps to follow.
ADG409BR-REEL7 Features
4 Channels
Switch Circuit: SP4T
100μA Supply Current
ADG409BR-REEL7 Applications
There are a lot of Analog Devices Inc. ADG409BR-REEL7 Analog Switches & Multiplexers ICs applications.
- Cellular phones
- Wireless Local Loop
- ATM
- Multi-Line E1 Interface Cards
- Precision data acquisition
- Existing multiplexer applications (both fault-protected and nonfault-protected)
- Sample-and-hold systems
- Avionics
- Private Branch Exchange (PBX)
- Digital cross connects (DSX-1)
