ADG409BRUZ
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | PRODUCTION (Last Updated: 3 months ago) |
| Mounting Type | Surface Mount |
| Package / Case | 16-TSSOP (0.173, 4.40mm Width) |
| Surface Mount | YES |
| Number of Pins | 16 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tube |
| JESD-609 Code | e3 |
| Pbfree Code | no |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Resistance | 100Ohm |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Multiplexer or Switches |
| Max Power Dissipation | 450mW |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 15V |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | ADG409 |
| Pin Count | 16 |
| Operating Supply Voltage | 12V |
| Number of Channels | 4 |
| Interface | Parallel |
| Number of Circuits | 2 |
| Max Supply Voltage | 32V |
| Min Supply Voltage | 5V |
| Analog IC - Other Type | DIFFERENTIAL MULTIPLEXER |
| Nominal Supply Current | 100μA |
| Power Dissipation | 3.1mW |
| Throw Configuration | 4PST |
| Propagation Delay | 130 ns |
| Turn On Delay Time | 225 ns |
| Number of Inputs | 8 |
| Supply Current-Max (Isup) | 0.5mA |
| Neg Supply Voltage-Nom (Vsup) | -15V |
| Turn-Off Delay Time | 150 ns |
| Max Dual Supply Voltage | 22V |
| On-State Resistance (Max) | 100Ohm |
| Dual Supply Voltage | 15V |
| Multiplexer/Demultiplexer Circuit | 4:1 |
| Off-state Isolation-Nom | 75 dB |
| Current - Leakage (IS(off)) (Max) | 500pA |
| Channel Capacitance (CS(off), CD(off)) | 11pF 20pF |
| On-state Resistance Match-Nom | 15Ohm |
| Switch Circuit | SP4T |
| Charge Injection | 20pC |
| Channel-to-Channel Matching (ΔRon) | 15 Ω (Max) |
| Crosstalk | -85dB @ 100kHz |
| Switching | BREAK-BEFORE-MAKE |
| Voltage - Supply, Dual (V±) | ±15V |
| Height | 1.05mm |
| Length | 5mm |
| Width | 4.4mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Contains Lead |
ADG409BRUZ Overview
Presented in 16-TSSOP (0.173, 4.40mm Width), this electrical component is convenient for overseas shipping. Advanced packaging method Tube is used to provide high reliability. It is mounted in the position Surface Mount. Multiplexers and demultiplexers have a ratio of 4:1. Around -40°C~85°C TA is the extended operating temperature. The total number of terminations is 16. By its 4 channels, the electronic component provides high-quality output. It is safe to turn on and run the electronic component with a 15V voltage supply. A key feature of the 16 series is the inclusion of this electronic part as part of its design. Unlike digital switches, these are based on SP4T switching circuits. A 2 circuit is present in this switch device. Try searching with ADG409 if you're looking for variants. This digital multiplexer has 100Ohm internal resistance. For details about the functions of 16 pins, please refer to the datasheets. Multiplexer or Switches is a typical switch device. It is generally not recommended to supply a voltage higher than 32V to the switch device in normal circumstances. There should be 5V voltage fed to the electrical part below 5V. There's no problem with dual supply voltage for this switch device. However, it shouldn't exceed 22V. This product is integrated with an analog integrated circuit (IC) of type DIFFERENTIAL MULTIPLEXER. The electrical part can be operated at 12V voltage levels. In order to operate the 8 inputs, there are several steps to follow.
ADG409BRUZ Features
4 Channels
Switch Circuit: SP4T
ADG409BRUZ Applications
There are a lot of Analog Devices Inc. ADG409BRUZ Analog Switches & Multiplexers ICs applications.
- Avionics test equipment
- Audio and video routing
- Medical systems
- SDH
- ISDN NT1/TA
- Sample-and-hold systems
- DVD-R
- Video switching
- Battery Powered Instruments
- Data Acquisition Systems
