ADG409BRUZ-REEL
| Parameters | |
|---|---|
| Mounting Type | Surface Mount |
| Package / Case | 16-TSSOP (0.173, 4.40mm Width) |
| Surface Mount | YES |
| Number of Pins | 16 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Resistance | 100Ohm |
| Terminal Finish | Matte Tin (Sn) |
| Max Power Dissipation | 450mW |
| Technology | CMOS |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 15V |
| Terminal Pitch | 0.65mm |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | ADG409 |
| Pin Count | 16 |
| Qualification Status | Not Qualified |
| Operating Supply Voltage | 12V |
| Number of Channels | 4 |
| Number of Circuits | 2 |
| Max Supply Voltage | 32V |
| Operating Supply Current | 100μA |
| Power Dissipation | 3.1mW |
| Throw Configuration | 4PST |
| Propagation Delay | 130 ns |
| Turn On Delay Time | 150 ns |
| Logic Function | Multiplexer |
| Number of Inputs | 8 |
| Supply Type | Dual, Single |
| Supply Current-Max (Isup) | 0.5mA |
| Neg Supply Voltage-Nom (Vsup) | -15V |
| Turn-Off Delay Time | 60 ns |
| Max Dual Supply Voltage | 22V |
| On-State Resistance (Max) | 100Ohm |
| Dual Supply Voltage | 15V |
| Multiplexer/Demultiplexer Circuit | 4:1 |
| Off-state Isolation-Nom | 75 dB |
| Current - Leakage (IS(off)) (Max) | 500pA |
| Channel Capacitance (CS(off), CD(off)) | 11pF 20pF |
| On-state Resistance Match-Nom | 15Ohm |
| Switch Circuit | SP4T |
| Charge Injection | 20pC |
| Channel-to-Channel Matching (ΔRon) | 15 Ω (Max) |
| Crosstalk | -85dB @ 100kHz |
| Switching | BREAK-BEFORE-MAKE |
| Voltage - Supply, Dual (V±) | ±15V |
| Length | 5mm |
| Width | 4.4mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Contains Lead |
ADG409BRUZ-REEL Overview
Shipping overseas is convenient with the electronic component packed in 16-TSSOP (0.173, 4.40mm Width). High reliability is ensured by the advanced packaging method Tape & Reel (TR). There is an analog multiplexer mounted in position Surface Mount. In the multiplexer and demultiplexer, 4:1 represents the number of circuits. Increasing operating temperature to around -40°C~85°C TA. The total number of terminations is 16. High-quality output is provided by the electronic component's 4 channels. It is safe to turn on and run the electronic component with a 15V voltage supply. It is part of the design of the 16 series that this electronic component is included. Circuits based on SP4T switching are used to construct these analog switch ics. There are 2 circuits in this switch device. Use ADG409 to search for variants of the digital switches. Internally, this switch multiplexer has a resistance of 100Ohm. Datasheets for 16 pin functions are available upon request. In normalcircumstances, users should not exceed 32V volts for the multiplexer. Dual, Single supply type digital switch with a low cost. For this digital switch to work, 100μA current would suffice. Despite this switch's dual supply capability, its voltage should not exceed 22V. 12V operating voltages can be used with this electrical part. A 8 input needs to be operated.
ADG409BRUZ-REEL Features
4 Channels
Switch Circuit: SP4T
100μA Supply Current
ADG409BRUZ-REEL Applications
There are a lot of Analog Devices Inc. ADG409BRUZ-REEL Analog Switches & Multiplexers ICs applications.
- Low-Voltage
- Relay Replacement
- DSLAMs
- SONET
- Industrial and process control systems
- Precision test equipment
- Avionics test equipment
- Communication systems
- Audio and video switching
- Remote Powered Equipment
