Parameters |
Factory Lead Time |
1 Week |
Lifecycle Status |
PRODUCTION (Last Updated: 3 months ago) |
Contact Plating |
Tin |
Mounting Type |
Surface Mount |
Package / Case |
16-TSSOP (0.173, 4.40mm Width) |
Number of Pins |
16 |
Supplier Device Package |
16-TSSOP |
Operating Temperature |
-40°C~85°C TA |
Packaging |
Tape & Reel (TR) |
Part Status |
Active |
Moisture Sensitivity Level (MSL) |
1 (Unlimited) |
Resistance |
100Ohm |
Max Operating Temperature |
125°C |
Min Operating Temperature |
-55°C |
Max Power Dissipation |
450mW |
Base Part Number |
ADG409 |
Number of Outputs |
2 |
Operating Supply Voltage |
12V |
Number of Channels |
4 |
Interface |
Parallel |
Number of Circuits |
2 |
Max Supply Voltage |
32V |
Operating Supply Current |
100μA |
Power Dissipation |
3.1mW |
Throw Configuration |
4PST |
Turn On Delay Time |
225 ns |
Logic Function |
Multiplexer |
Number of Inputs |
8 |
Voltage - Supply, Single/Dual (±) |
12V ±15V |
Supply Type |
Dual, Single |
Turn-Off Delay Time |
150 ns |
Max Dual Supply Voltage |
22V |
On-State Resistance (Max) |
100Ohm |
High Level Output Current |
20mA |
Dual Supply Voltage |
15V |
Multiplexer/Demultiplexer Circuit |
4:1 |
Current - Leakage (IS(off)) (Max) |
500pA |
Channel Capacitance (CS(off), CD(off)) |
11pF 20pF |
Switch Circuit |
SP4T |
Charge Injection |
20pC |
Channel-to-Channel Matching (ΔRon) |
15Ohm (Max) |
Crosstalk |
-85dB @ 100kHz |
RoHS Status |
ROHS3 Compliant |
Lead Free |
Contains Lead |
ADG409BRUZ-REEL7 Overview
The electrical component comes in 16-TSSOP (0.173, 4.40mm Width) packaging, which makes it convenient to ship overseas. Advanced packaging method Tape & Reel (TR) is used to provide high reliability. In Surface Mount, you'll find this switch device. The ratio between the number of multiplexer and demultiplexer circuits is 4:1. Increasing operating temperature to around -40°C~85°C TA. By its 4 channels, the electronic component provides high-quality output. The analog switch ics are built using SP4T switching circuits. This multiplexer is composed of 2 circuits. Try searching with ADG409 if you're looking for variants. In this multiplexer, the internal resistance is 100Ohm. The functions of 16 pins can be found in the datasheets. Multiplexers should not be powered above 32V in normal situations. Dual, Single supply type digital switch with a low cost. This digital switch can be operated with a current of 100μA. There's no problem with dual supply voltage for this switch device. However, it shouldn't exceed 22V. There is a voltage range of 12V operating voltages for the electrical part. Operating the 8 inputs requires 8 inputs. It is not recommended to operate the switches in an environment with a temperature higher than 125°C. 2 outputs are included in the analogue multiplexer. Suppliers are offering a 16-TSSOP package.
ADG409BRUZ-REEL7 Features
4 Channels
Switch Circuit: SP4T
100μA Supply Current
ADG409BRUZ-REEL7 Applications
There are a lot of Analog Devices Inc. ADG409BRUZ-REEL7 Analog Switches & Multiplexers ICs applications.
- Channelized and Unchannelized DS3 applications
- Fiber In The Loop (FITL)
- Multi-Line E1 Interface Cards
- DSUs
- Digital cross connects (DSX-1)
- Audio and video routing
- High speed data transmission line cards
- Industrial and process control systems
- T1/E1 Terminals
- PDAs