Parameters |
Factory Lead Time |
1 Week |
Lifecycle Status |
PRODUCTION (Last Updated: 3 months ago) |
Contact Plating |
Tin |
Mounting Type |
Surface Mount |
Package / Case |
16-SOIC (0.154, 3.90mm Width) |
Surface Mount |
YES |
Number of Pins |
16 |
Operating Temperature |
-40°C~85°C TA |
Packaging |
Tape & Reel (TR) |
JESD-609 Code |
e3 |
Pbfree Code |
no |
Part Status |
Active |
Moisture Sensitivity Level (MSL) |
1 (Unlimited) |
Number of Terminations |
16 |
ECCN Code |
EAR99 |
Resistance |
100Ohm |
Max Power Dissipation |
600mW |
Technology |
CMOS |
Terminal Form |
GULL WING |
Peak Reflow Temperature (Cel) |
260 |
Number of Functions |
1 |
Supply Voltage |
15V |
Time@Peak Reflow Temperature-Max (s) |
30 |
Base Part Number |
ADG409 |
Pin Count |
16 |
Operating Supply Voltage |
12V |
Number of Channels |
4 |
Interface |
Parallel |
Number of Circuits |
2 |
Max Supply Voltage |
32V |
Min Supply Voltage |
5V |
Operating Supply Current |
100μA |
Power Dissipation |
3.1mW |
Throw Configuration |
4PST |
Propagation Delay |
130 ns |
Turn On Delay Time |
150 ns |
Logic Function |
Multiplexer |
Number of Inputs |
8 |
Supply Type |
Dual, Single |
Neg Supply Voltage-Nom (Vsup) |
-15V |
Turn-Off Delay Time |
60 ns |
Max Dual Supply Voltage |
22V |
On-State Resistance (Max) |
100Ohm |
High Level Output Current |
20mA |
Dual Supply Voltage |
15V |
Multiplexer/Demultiplexer Circuit |
4:1 |
Off-state Isolation-Nom |
75 dB |
Current - Leakage (IS(off)) (Max) |
500pA |
Channel Capacitance (CS(off), CD(off)) |
11pF 20pF |
On-state Resistance Match-Nom |
15Ohm |
Switch Circuit |
SP4T |
Charge Injection |
20pC |
Channel-to-Channel Matching (ΔRon) |
15 Ω (Max) |
Crosstalk |
-85dB @ 100kHz |
Switching |
BREAK-BEFORE-MAKE |
Voltage - Supply, Dual (V±) |
±15V |
Height Seated (Max) |
1.75mm |
Length |
9.9mm |
Width |
3.9mm |
Radiation Hardening |
No |
RoHS Status |
ROHS3 Compliant |
Lead Free |
Contains Lead |
ADG409BRZ-REEL Overview
Shipping overseas is convenient with the electronic component packed in 16-SOIC (0.154, 3.90mm Width). High reliability is ensured by the advanced packaging method Tape & Reel (TR). In Surface Mount, you'll find this switch device. Multiplexers and demultiplexers have a ratio of 4:1. Operational temperature extended around -40°C~85°C TA. Total terminations are 16. A high-quality output is provided by the electrical component's 4 channels. In the case of a voltage supply of 15V volts, the electrical part can be powered up and run. The electrical component body receives 16 pins. Unlike digital switches, these are based on SP4T switching circuits. There are 2 circuits in this multiplexer. Search with ADG409 if you are looking for analog multiplexer variants. There is 100Ohm internal resistance in this digital multiplexer. The functions of 16 pins can be found in the datasheets. In a normalsituation, users should not supply the switches with voltage higher than 32V. An effective Dual, Single supply digital multiplexer. In order for the electronic part to function properly, the lowest voltage should be 5V. An operating current of 100μA would be sufficient for this switch device. There is no problem with using dual supply voltage, but it should not exceed 22V. There is a voltage range of 12V operating voltages for the electrical part. There are 8 inputs to be operated.
ADG409BRZ-REEL Features
4 Channels
Switch Circuit: SP4T
100μA Supply Current
ADG409BRZ-REEL Applications
There are a lot of Analog Devices Inc. ADG409BRZ-REEL Analog Switches & Multiplexers ICs applications.
- Cable PC
- Power routing
- T1/E1 Terminals
- Audio and video routing
- Intelligent PBX
- Relay Replacement
- Cell phones
- Communication systems
- PDH Multiplexers
- Audio and video switching