ADG411BN
| Parameters | |
|---|---|
| Dual Supply Voltage | 15V |
| Multiplexer/Demultiplexer Circuit | 1:1 |
| Off-state Isolation-Nom | 68 dB |
| Current - Leakage (IS(off)) (Max) | 250pA |
| Channel Capacitance (CS(off), CD(off)) | 9pF 9pF |
| Switch Circuit | SPST - NC |
| Switch Time (Ton, Toff) (Max) | 175ns, 145ns |
| Charge Injection | 5pC |
| Crosstalk | -85dB @ 1MHz |
| Switching | BREAK-BEFORE-MAKE |
| Switch-on Time-Max | 175ns |
| Normal Position | NC |
| Width | 7.62mm |
| REACH SVHC | Unknown |
| RoHS Status | Non-RoHS Compliant |
| Mounting Type | Through Hole |
| Package / Case | 16-DIP (0.300, 7.62mm) |
| Surface Mount | NO |
| Number of Pins | 16 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tube |
| JESD-609 Code | e0 |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Resistance | 35Ohm |
| Terminal Finish | Tin/Lead (Sn85Pb15) |
| Subcategory | Multiplexer or Switches |
| Technology | CMOS |
| Terminal Position | DUAL |
| Peak Reflow Temperature (Cel) | NOT SPECIFIED |
| Number of Functions | 4 |
| Supply Voltage | 15V |
| Reach Compliance Code | not_compliant |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | ADG411 |
| Output | SEPARATE OUTPUT |
| Pin Count | 16 |
| Qualification Status | Not Qualified |
| Operating Supply Voltage | 12V |
| Number of Channels | 4 |
| Max Supply Voltage | 25V |
| Power Dissipation | 470mW |
| Throw Configuration | SPST |
| Voltage - Supply, Single/Dual (±) | 12V ±15V |
| Neg Supply Voltage-Nom (Vsup) | -15V |
| Max Dual Supply Voltage | 22V |
| On-State Resistance (Max) | 35Ohm |
ADG411BN Overview
As the electronic part is packed in 16-DIP (0.300, 7.62mm), international shipping is convenient. This high-reliability packaging method uses advanced packaging methods Tube. The multiplexer is located in Through Hole. Multiplexer and demultiplexer circuits have a number 1:1. An extended operating temperature of -40°C~85°C TA degrees Celsius. Total terminations are 16. Due to its 4 channels, the electrical component produces high-quality output. Powered by a 15V voltage supply, the electrical part should be switched on and run. As part of its design, the 16 series is equipped with this electronic component. Circuits based on SPST - NC switching are used to construct these analog switch ics. Try searching for ADG411 variants of the analog switch ic. Analog switches have 35Ohm internal resistance. To find out what the 16 pins do, please refer to the datasheets. There is Multiplexer or Switches analog multiplexer like this in the world. Users should never supply a voltage higher than 25V to a switch device. It is possible to supply this switch device with dual voltages. However, it is not advisable to exceed 22V. A total of SEPARATE OUTPUT outputs are available on this analog switch ic. This electrical part is compatible with 12V operating voltages.
ADG411BN Features
4 Channels
Switch Circuit: SPST - NC
ADG411BN Applications
There are a lot of Analog Devices Inc. ADG411BN Analog Switches & Multiplexers ICs applications.
- Wireless Local Loop
- Cable PC
- Industrial
- Fiber to the Home
- Imaging
- Avionics test equipment
- High reliability control systems
- Battery Powered Systems
- Data Acquisition Systems
- Digital access cross connects
