Parameters |
Terminal Pitch |
1.27mm |
Time@Peak Reflow Temperature-Max (s) |
20 |
Base Part Number |
ADG411 |
Pin Count |
16 |
Operating Supply Voltage |
12V |
Polarity |
Inverting |
Number of Channels |
4 |
Interface |
Parallel |
Max Supply Voltage |
25V |
Min Supply Voltage |
5V |
Operating Supply Current |
100pA |
Power Dissipation |
35μW |
Max Supply Current |
1μA |
Throw Configuration |
SPST |
Turn On Delay Time |
175 ns |
Supply Type |
Dual, Single |
Neg Supply Voltage-Nom (Vsup) |
-15V |
Turn-Off Delay Time |
145 ns |
Max Dual Supply Voltage |
22V |
On-State Resistance (Max) |
35Ohm |
Min Dual Supply Voltage |
13.5V |
High Level Output Current |
30mA |
Dual Supply Voltage |
15V |
Multiplexer/Demultiplexer Circuit |
1:1 |
Off-state Isolation-Nom |
68 dB |
Current - Leakage (IS(off)) (Max) |
250pA |
Channel Capacitance (CS(off), CD(off)) |
9pF 9pF |
Switch Circuit |
SPST - NC |
Switch Time (Ton, Toff) (Max) |
175ns, 145ns |
Charge Injection |
5pC |
Crosstalk |
-85dB @ 1MHz |
Switching |
BREAK-BEFORE-MAKE |
Normal Position |
NC |
Voltage - Supply, Dual (V±) |
±15V |
Height |
1.5mm |
Length |
10mm |
Width |
4mm |
Radiation Hardening |
No |
RoHS Status |
Non-RoHS Compliant |
Lead Free |
Contains Lead |
Mounting Type |
Surface Mount |
Package / Case |
16-SOIC (0.154, 3.90mm Width) |
Surface Mount |
YES |
Number of Pins |
16 |
Operating Temperature |
-40°C~85°C TA |
Packaging |
Tube |
JESD-609 Code |
e0 |
Pbfree Code |
no |
Part Status |
Obsolete |
Moisture Sensitivity Level (MSL) |
1 (Unlimited) |
Number of Terminations |
16 |
ECCN Code |
EAR99 |
Resistance |
35Ohm |
Terminal Finish |
Tin/Lead (Sn85Pb15) |
Additional Feature |
ALSO OPERATE WITH 12V SINGLE SUPPLY |
Subcategory |
Multiplexer or Switches |
Max Power Dissipation |
35μW |
Technology |
CMOS |
Terminal Form |
GULL WING |
Peak Reflow Temperature (Cel) |
235 |
Number of Functions |
4 |
Supply Voltage |
15V |
ADG411BR Overview
This electronic part is conveniently packaged in 16-SOIC (0.154, 3.90mm Width), making it easy to ship abroad. A high level of reliability can be achieved through the use of an advanced packaging method Tube. There is an analog multiplexer mounted in position Surface Mount. 1:1 is the ratio of multiplexer to demultiplexer circuits. Operating temperature around -40°C~85°C TA extended. Total terminations are 16. A electrical component with 4 channels is capable of high-quality output. When the electronic component is given a voltage of 15V, it should be turned on and run. An electrical component of this type can be found in the 16 series. Multiplexers built on a SPST - NC switching circuit are built. Using the ADG411 search parameter, you can discover variants of the switch. As far as internal resistance is concerned, it has 35Ohm. The functions of 16 pins can be found in the datasheets. There is Multiplexer or Switches analog multiplexer like this in the world. normally, users should not supply switches with voltages higher than 25V. Analogue multiplexers of the Dual, Single supply type that are cost-effective. It is recommended to use 5V as the lowest voltage for the electrical part. For this digital switch to work, 100pA current would suffice. Put voltage above 1μA on the multiplexer to cause damage. Despite this switch device's dual supply capability, its voltage should not exceed 22V. It is recommended that you attach at least 13.5V to your dual power supply. 12V operating voltages can be used with this electrical part. Additional features of the electronic component include: ALSO OPERATE WITH 12V SINGLE SUPPLY.
ADG411BR Features
4 Channels
Switch Circuit: SPST - NC
100pA Supply Current
Additional Features: ALSO OPERATE WITH 12V SINGLE SUPPLY
ADG411BR Applications
There are a lot of Analog Devices Inc. ADG411BR Analog Switches & Multiplexers ICs applications.
- Medical
- Signal routing between systems
- SONET/SDH ADM
- Audio/video switches
- Sample-and-hold systems
- T1/E1 Terminals
- Battery Powered Instruments
- Routers
- FTTH
- E1 Network Equipment