ADG412BNZ

175ns, 145ns SPST - NO 35Ohm Analog Switches BREAK-BEFORE-MAKE ADG412 16 Pins 250pA 15V 16-DIP (0.300, 7.62mm)

Manufacturer: Analog Devices Inc.
Nocochips NO: 84-ADG412BNZ
Package: 16-DIP (0.300, 7.62mm)
Datasheet: PDF
Stock: 942
Description: 175ns, 145ns SPST - NO 35Ohm Analog Switches BREAK-BEFORE-MAKE ADG412 16 Pins 250pA 15V 16-DIP (0.300, 7.62mm)(Kg)

Details

Tags

Parameters
Factory Lead Time	1 Week
Lifecycle Status	PRODUCTION (Last Updated: 2 weeks ago)
Mounting Type	Through Hole
Package / Case	16-DIP (0.300, 7.62mm)
Surface Mount	NO
Number of Pins	16
Operating Temperature	-40°C~85°C TA
Packaging	Tube
JESD-609 Code	e3
Pbfree Code	no
Part Status	Active
Moisture Sensitivity Level (MSL)	1 (Unlimited)
Number of Terminations	16
ECCN Code	EAR99
Resistance	35Ohm
Terminal Finish	Matte Tin (Sn)
Additional Feature	ALSO OPERATE WITH 12V SINGLE SUPPLY
Subcategory	Multiplexer or Switches
Max Power Dissipation	35μW
Technology	CMOS
Number of Functions	4
Supply Voltage	15V
Base Part Number	ADG412
Pin Count	16
Operating Supply Voltage	12V
Polarity	Non-Inverting
Number of Channels	4
Interface	Parallel
Max Supply Voltage	25V
Min Supply Voltage	5V
Operating Supply Current	100pA
Power Dissipation	35μW
Max Supply Current	1μA
Throw Configuration	SPST
Turn On Delay Time	175 ns
Supply Type	Dual, Single
Neg Supply Voltage-Nom (Vsup)	-15V
Turn-Off Delay Time	145 ns
Max Dual Supply Voltage	22V
On-State Resistance (Max)	35Ohm
Min Dual Supply Voltage	13.5V
High Level Output Current	30mA
Dual Supply Voltage	15V
Multiplexer/Demultiplexer Circuit	1:1
Off-state Isolation-Nom	68 dB
Current - Leakage (IS(off)) (Max)	250pA
Channel Capacitance (CS(off), CD(off))	9pF 9pF
Switch Circuit	SPST - NO
Switch Time (Ton, Toff) (Max)	175ns, 145ns
Charge Injection	5pC
Crosstalk	-85dB @ 1MHz
Switching	BREAK-BEFORE-MAKE
Normal Position	NO
Voltage - Supply, Dual (V±)	±15V
Height	3.3mm
Length	20.07mm
Width	6.35mm
Radiation Hardening	No
REACH SVHC	No SVHC
RoHS Status	ROHS3 Compliant
Lead Free	Contains Lead

ADG412BNZ Overview

The electrical component comes in 16-DIP (0.300, 7.62mm) packaging, which makes it convenient to ship overseas. This packaging method provides high reliability because it uses advanced packaging techniques. The multiplexer is located in Through Hole. Multiplexers and demultiplexers have a number of circuits 1:1. Around -40°C~85°C TA is the extended operating temperature. There are 16 terminations totally. A high-quality output is provided by the electrical component's 4 channels. It is safe to turn on and run the electronic component with a 15V voltage supply. A total of 16 pins are injected into the electrical part body. Multiplexers built on a SPST - NO switching circuit are built. Try searching for ADG412 variants of the analog switch ic. In this multiplexer, the internal resistance is 35Ohm. For functions related to 16 pins, please refer to the datasheets. In this analog multiplexer, the value is Multiplexer or Switches. An abnormal situation would be for the switch device to be supplied with a voltage greater than 25V. Dual, Single supply type digital switch with a low cost. 5V should be the lowest voltage fed to the electronic component. 100pA current would be enough for this multiplexer to operate. A digital multiplexer may suffer damage if voltage is applied above 1μA. Dual supply volatge is feasible for this multiplexer. But it should not go beyond 22V. For dual power supplies, a voltage of at least 13.5V should be attached. This electrical part is compatible with 12V operating voltages. Don't miss this electronic component's additional features, such as: ALSO OPERATE WITH 12V SINGLE SUPPLY.