Parameters |
Packaging |
Tape & Reel (TR) |
JESD-609 Code |
e0 |
Pbfree Code |
no |
Part Status |
Obsolete |
Moisture Sensitivity Level (MSL) |
1 (Unlimited) |
Number of Terminations |
16 |
ECCN Code |
EAR99 |
Resistance |
35Ohm |
Terminal Finish |
Tin/Lead (Sn85Pb15) |
Additional Feature |
ALSO OPERATE WITH 12V SINGLE SUPPLY |
Subcategory |
Multiplexer or Switches |
Max Power Dissipation |
35μW |
Technology |
CMOS |
Terminal Form |
GULL WING |
Peak Reflow Temperature (Cel) |
240 |
Number of Functions |
4 |
Supply Voltage |
15V |
Terminal Pitch |
1.27mm |
Reach Compliance Code |
not_compliant |
Time@Peak Reflow Temperature-Max (s) |
30 |
Base Part Number |
ADG412 |
Output |
SEPARATE OUTPUT |
Pin Count |
16 |
Qualification Status |
Not Qualified |
Operating Supply Voltage |
12V |
Number of Channels |
4 |
Interface |
Parallel |
Max Supply Voltage |
25V |
Min Supply Voltage |
5V |
Operating Supply Current |
100pA |
Power Dissipation |
35μW |
Max Supply Current |
1μA |
Throw Configuration |
SPST |
Turn On Delay Time |
175 ns |
Supply Type |
Dual, Single |
Neg Supply Voltage-Nom (Vsup) |
-15V |
Turn-Off Delay Time |
145 ns |
Max Dual Supply Voltage |
22V |
On-State Resistance (Max) |
35Ohm |
Min Dual Supply Voltage |
13.5V |
Dual Supply Voltage |
15V |
Multiplexer/Demultiplexer Circuit |
1:1 |
Off-state Isolation-Nom |
68 dB |
Current - Leakage (IS(off)) (Max) |
250pA |
Channel Capacitance (CS(off), CD(off)) |
9pF 9pF |
Switch Circuit |
SPST - NO |
Switch Time (Ton, Toff) (Max) |
175ns, 145ns |
Charge Injection |
5pC |
Crosstalk |
-85dB @ 1MHz |
Switching |
BREAK-BEFORE-MAKE |
Normal Position |
NO |
Voltage - Supply, Dual (V±) |
±15V |
Height Seated (Max) |
1.75mm |
Length |
9.9mm |
Width |
3.9mm |
RoHS Status |
Non-RoHS Compliant |
Lead Free |
Contains Lead |
Mounting Type |
Surface Mount |
Package / Case |
16-SOIC (0.154, 3.90mm Width) |
Surface Mount |
YES |
Number of Pins |
16 |
Operating Temperature |
-40°C~85°C TA |
ADG412BR-REEL7 Overview
Shipping overseas is convenient due to the electrical component's packing in 16-SOIC (0.154, 3.90mm Width). Advanced packaging method Tape & Reel (TR) is used to provide high reliability. Mounted in Surface Mount is this multiplexer. In the multiplexer and demultiplexer, 1:1 represents the number of circuits. An extended operating temperature of -40°C~85°C TA degrees Celsius. In total, 16 terminations have occurred. A electrical component with 4 channels is capable of high-quality output. In the case of a voltage supply of 15V volts, the electrical part can be powered up and run. This electronic part can be found in the 16 series. On the other hand, analog switches can be constructed using SPST - NO switching circuits. Use ADG412 to search for variants of the digital switches. An switch multiplexer with 35Ohm internal resistance has a value of 35Ohm. You can find the functions of the 16 pins in the datasheets. The analog multiplexer shown here is a typical Multiplexer or Switches. It is generally not recommended to supply a voltage higher than 25V to the switch device in normal circumstances. Analog switch ics with Dual, Single supply type are cost-effective. 5V should be the lowest voltage fed to the electronic component. For this multiplexer to operate, 100pA current would be sufficient. If you put voltage higher than 1μA on the digital multiplexer, damage may occur. It is possible to supply this switch device with dual voltages. However, it is not advisable to exceed 22V. When using dual power supplies, you should attach at least 13.5V. The digital multiplexer has SEPARATE OUTPUT outputs that can be used. The electrical part can be operated at 12V voltage levels. You shouldn't miss the additional features of the electrical component, such as: ALSO OPERATE WITH 12V SINGLE SUPPLY.
ADG412BR-REEL7 Features
4 Channels
Switch Circuit: SPST - NO
100pA Supply Current
Additional Features: ALSO OPERATE WITH 12V SINGLE SUPPLY
ADG412BR-REEL7 Applications
There are a lot of Analog Devices Inc. ADG412BR-REEL7 Analog Switches & Multiplexers ICs applications.
- Microwave transmission systems
- Signal routing between systems
- Video signal routing
- Industrial control systems
- Communication systems
- Microprocessor Controlled Analog Systems
- Sample hold systems
- ATM
- Medical systems
- High-Voltage