Parameters |
Factory Lead Time |
1 Week |
Lifecycle Status |
PRODUCTION (Last Updated: 2 weeks ago) |
Contact Plating |
Tin |
Mount |
Surface Mount |
Mounting Type |
Surface Mount |
Package / Case |
8-SOIC (0.154, 3.90mm Width) |
Number of Pins |
8 |
Operating Temperature |
-40°C~85°C TA |
Packaging |
Tube |
JESD-609 Code |
e3 |
Pbfree Code |
no |
Part Status |
Active |
Moisture Sensitivity Level (MSL) |
1 (Unlimited) |
Number of Terminations |
8 |
ECCN Code |
EAR99 |
Resistance |
35Ohm |
Subcategory |
Multiplexer or Switches |
Max Power Dissipation |
400mW |
Technology |
CMOS |
Terminal Form |
GULL WING |
Peak Reflow Temperature (Cel) |
260 |
Number of Functions |
1 |
Supply Voltage |
15V |
Time@Peak Reflow Temperature-Max (s) |
30 |
Base Part Number |
ADG417 |
Pin Count |
8 |
Operating Supply Voltage |
9V |
Polarity |
Inverting, Non-Inverting |
Number of Channels |
1 |
Max Supply Voltage |
12V |
Min Supply Voltage |
5V |
Operating Supply Current |
100pA |
Power Dissipation |
35μW |
Max Supply Current |
1μA |
Throw Configuration |
SPST |
Turn On Delay Time |
160 ns |
Supply Type |
Dual, Single |
Neg Supply Voltage-Nom (Vsup) |
-15V |
Turn-Off Delay Time |
100 ns |
Max Dual Supply Voltage |
15V |
On-State Resistance (Max) |
35Ohm |
Min Dual Supply Voltage |
5V |
High Level Output Current |
30mA |
Multiplexer/Demultiplexer Circuit |
1:1 |
Off-state Isolation-Nom |
80 dB |
Current - Leakage (IS(off)) (Max) |
250pA |
Channel Capacitance (CS(off), CD(off)) |
6pF 6pF |
Switch Circuit |
SPST - NC |
Switch Time (Ton, Toff) (Max) |
160ns, 100ns |
Charge Injection |
7pC |
Switching |
BREAK-BEFORE-MAKE |
Drain to Source Resistance |
25Ohm |
Normal Position |
NC |
Voltage - Supply, Dual (V±) |
±15V |
Height |
1.5mm |
Length |
5mm |
Width |
4mm |
Radiation Hardening |
No |
REACH SVHC |
No SVHC |
RoHS Status |
ROHS3 Compliant |
Lead Free |
Contains Lead |
ADG417BRZ Overview
Shipping overseas is convenient with the electronic component packed in 8-SOIC (0.154, 3.90mm Width). Advanced packaging method Tube is used to provide high reliability. In Surface Mount, this analog switch is mounted. Multiplexers and demultiplexers have the same number of circuits 1:1. Operating temperature extended to -40°C~85°C TA. Totally, there are 8 terminations. A high-quality output is provided by the electrical component's 1 channels. When the electronic component is given a voltage of 15V, it should be turned on and run. A total of 8 pins are injected into the body of the electronic part. Unlike digital switches, these are based on SPST - NC switching circuits. Search with ADG417 if you are looking for analog multiplexer variants. As far as internal resistance is concerned, it has 35Ohm. To find out what the 8 pins do, please refer to the datasheets. Multiplexer or Switches is a typical switch device. Users should never supply a voltage higher than 12V to a switch device. The digital multiplexer has a low cost Dual, Single supply. It is recommended to use 5V as the lowest voltage for the electrical part. This multiplexer would work with 100pA current. If you put voltage higher than 1μA on the digital multiplexer, damage may occur. Despite this switch's dual supply capability, its voltage should not exceed 15V. If you are using a dual power supply, you should attach at least 5V. Operating voltages of 9V are compatible with the electrical part. A Drain to Source resistance of 25Ohm is shown for this electronic part.
ADG417BRZ Features
1 Channels
Switch Circuit: SPST - NC
100pA Supply Current
Drain-to-Source resistance: 25Ohm
ADG417BRZ Applications
There are a lot of Analog Devices Inc. ADG417BRZ Analog Switches & Multiplexers ICs applications.
- PBXs
- Digital cross connects (DSX-1)
- Digital Cross-Connects
- SDH
- Cable Telephony – NIU, Set-Top Box, Home Side Box
- Battery-powered systems
- Industrial
- Cell phones
- RGB switches
- Medical systems