ADG426BN
| Parameters | |
|---|---|
| Channel Capacitance (CS(off), CD(off)) | 5pF 50pF |
| On-state Resistance Match-Nom | 4Ohm |
| Switch Time (Ton, Toff) (Max) | 160ns, 150ns |
| Charge Injection | 8pC |
| Channel-to-Channel Matching (ΔRon) | 4 Ω |
| Crosstalk | -85dB @ 1MHz |
| Switching | BREAK-BEFORE-MAKE |
| Signal Current-Max | 0.02A |
| Voltage - Supply, Dual (V±) | ±15V |
| Height Seated (Max) | 6.35mm |
| Length | 37.4mm |
| REACH SVHC | No SVHC |
| RoHS Status | Non-RoHS Compliant |
| Mounting Type | Through Hole |
| Package / Case | 28-DIP (0.600, 15.24mm) |
| Surface Mount | NO |
| Number of Pins | 28 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tube |
| JESD-609 Code | e0 |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 28 |
| ECCN Code | EAR99 |
| Resistance | 80Ohm |
| Subcategory | Multiplexer or Switches |
| Technology | BICMOS |
| Terminal Position | DUAL |
| Peak Reflow Temperature (Cel) | NOT SPECIFIED |
| Number of Functions | 1 |
| Supply Voltage | 15V |
| Terminal Pitch | 2.54mm |
| Reach Compliance Code | not_compliant |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | ADG426 |
| Pin Count | 28 |
| Qualification Status | Not Qualified |
| Operating Supply Voltage | 12V |
| Number of Channels | 16 |
| Number of Circuits | 1 |
| Max Supply Voltage | 25V |
| Analog IC - Other Type | SINGLE-ENDED MULTIPLEXER |
| Nominal Supply Current | 100μA |
| Number of Inputs | 16 |
| Neg Supply Voltage-Nom (Vsup) | -15V |
| Max Dual Supply Voltage | 22V |
| On-State Resistance (Max) | 80Ohm |
| Dual Supply Voltage | 15V |
| Multiplexer/Demultiplexer Circuit | 16:1 |
| Off-state Isolation-Nom | 75 dB |
| Current - Leakage (IS(off)) (Max) | 500pA |
ADG426BN Overview
The electronic part can be shipped overseas conveniently because it is packaged in 28-DIP (0.600, 15.24mm). To ensure high reliability, a new packaging method Tube is used. Through Hole is where this multiplexer is located. 16:1 is the ratio of multiplexer to demultiplexer circuits. Operating temperature around -40°C~85°C TA extended. Totally, there are 28 terminations. As a result of its 16 channels, this electronic component provides high-quality output. Powered by a 15V voltage supply, the electrical part should be switched on and run. 28 pins are injected to the electronic part body. A total of 1 circuits make up this switch device. Try searching with ADG426 if you're looking for variants. In this multiplexer, the internal resistance is 80Ohm. Please refer to the datasheets for 28 pins functions. This switch device is a typical Multiplexer or Switches. Multiplexers should not be powered above 25V in normal situations. Despite this switch device's dual supply capability, its voltage should not exceed 22V. It is integrated with SINGLE-ENDED MULTIPLEXER analog ICs. Operating voltages of 12V are compatible with the electrical part. In order to operate the 16 inputs, there are several steps to follow.
ADG426BN Features
16 Channels
ADG426BN Applications
There are a lot of Analog Devices Inc. ADG426BN Analog Switches & Multiplexers ICs applications.
- Power routing
- Modems
- Fault Tolerant Systems
- Industrial control systems
- Digital Cross-Connects
- E1 Multiplexer
- SONET/SDH ADM
- Communication systems
- Sample-and-hold systems
- Mechanical reed relay replacement
