ADG426BRS-REEL
| Parameters | |
|---|---|
| Mounting Type | Surface Mount |
| Package / Case | 28-SSOP (0.209, 5.30mm Width) |
| Surface Mount | YES |
| Number of Pins | 28 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 28 |
| ECCN Code | EAR99 |
| Resistance | 80Ohm |
| Max Power Dissipation | 3.1mW |
| Technology | BICMOS |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 240 |
| Number of Functions | 1 |
| Supply Voltage | 15V |
| Terminal Pitch | 0.65mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | ADG426 |
| Pin Count | 28 |
| Operating Supply Voltage | 12V |
| Number of Channels | 16 |
| Interface | Parallel |
| Number of Circuits | 1 |
| Max Supply Voltage | 25V |
| Operating Supply Current | 100μA |
| Power Dissipation | 3.1mW |
| Logic Function | Multiplexer |
| Number of Inputs | 16 |
| Supply Type | Dual, Single |
| Supply Current-Max (Isup) | 0.5mA |
| Neg Supply Voltage-Nom (Vsup) | -15V |
| Turn-Off Delay Time | 110 ns |
| Max Dual Supply Voltage | 22V |
| On-State Resistance (Max) | 80Ohm |
| Dual Supply Voltage | 15V |
| Multiplexer/Demultiplexer Circuit | 16:1 |
| Off-state Isolation-Nom | 75 dB |
| Current - Leakage (IS(off)) (Max) | 500pA |
| Channel Capacitance (CS(off), CD(off)) | 5pF 50pF |
| On-state Resistance Match-Nom | 4Ohm |
| Switch Time (Ton, Toff) (Max) | 160ns, 150ns |
| Charge Injection | 8pC |
| Channel-to-Channel Matching (ΔRon) | 4 Ω |
| Crosstalk | -85dB @ 1MHz |
| Switching | BREAK-BEFORE-MAKE |
| Signal Current-Max | 0.02A |
| Voltage - Supply, Dual (V±) | ±15V |
| Height Seated (Max) | 2mm |
| Width | 5.3mm |
| Radiation Hardening | No |
| RoHS Status | Non-RoHS Compliant |
| Lead Free | Contains Lead |
ADG426BRS-REEL Overview
Shipping overseas is convenient due to the electrical component's packing in 28-SSOP (0.209, 5.30mm Width). This high-reliability packaging method uses advanced packaging methods Tape & Reel (TR). The multiplexer is located in Surface Mount. In the multiplexer and demultiplexer, 16:1 represents the number of circuits. Operating temperature extended to -40°C~85°C TA. 28 terminations have been made so far. The electronic part provides high-quality output because it has 16 channels. When a voltage supply of 15V is used, the electronic component should be turned on and run. An electrical component of this type can be found in the 28 series. The multiplexer consists of 1 circuits. Try searching for ADG426 variants of the analog switch ic. An switch multiplexer with 80Ohm internal resistance has a value of 80Ohm. Datasheets for functions of 28 pins are available. In normalcircumstances, users should not exceed 25V volts for the multiplexer. Digital switch that provides Dual, Single power at a cost-effective price. This digital switch can be operated with a current of 100μA. Despite this switch device's dual supply capability, its voltage should not exceed 22V. The electrical part can be operated at 12V voltage levels. In order to operate the 16 inputs, there are several steps to follow.
ADG426BRS-REEL Features
16 Channels
100μA Supply Current
ADG426BRS-REEL Applications
There are a lot of Analog Devices Inc. ADG426BRS-REEL Analog Switches & Multiplexers ICs applications.
- FTTH
- Data switching
- SDH/SONET multiplexers
- Public switching systems
- Medical systems
- Avionics and Military Systems
- Remote wireless modules
- Medical
- Remote Powered Equipment
- Battery Powered Systems
