ADG426BRSZ

160ns, 150ns 80Ohm DUAL Analog Switches BREAK-BEFORE-MAKE ADG426 28 Pins 500pA 15V 28-SSOP (0.209, 5.30mm Width)

Manufacturer: Analog Devices Inc.
Nocochips NO: 84-ADG426BRSZ
Package: 28-SSOP (0.209, 5.30mm Width)
Datasheet: PDF
Stock: 137
Description: 160ns, 150ns 80Ohm DUAL Analog Switches BREAK-BEFORE-MAKE ADG426 28 Pins 500pA 15V 28-SSOP (0.209, 5.30mm Width)(Kg)

Details

Tags

Parameters
Channel Capacitance (CS(off), CD(off))	5pF 50pF
On-state Resistance Match-Nom	4Ohm
Switch Time (Ton, Toff) (Max)	160ns, 150ns
Charge Injection	8pC
Channel-to-Channel Matching (ΔRon)	4 Ω
Crosstalk	-85dB @ 1MHz
Switching	BREAK-BEFORE-MAKE
Drain to Source Resistance	80Ohm
Signal Current-Max	0.02A
Voltage - Supply, Dual (V±)	±15V
Height	1.75mm
Length	10.2mm
Width	5.3mm
Radiation Hardening	No
REACH SVHC	No SVHC
RoHS Status	ROHS3 Compliant
Lead Free	Contains Lead
Factory Lead Time	1 Week
Lifecycle Status	PRODUCTION (Last Updated: 2 weeks ago)
Contact Plating	Tin
Mounting Type	Surface Mount
Package / Case	28-SSOP (0.209, 5.30mm Width)
Surface Mount	YES
Number of Pins	28
Operating Temperature	-40°C~85°C TA
Packaging	Tube
JESD-609 Code	e3
Pbfree Code	no
Part Status	Active
Moisture Sensitivity Level (MSL)	3 (168 Hours)
Number of Terminations	28
ECCN Code	EAR99
Resistance	80Ohm
Subcategory	Multiplexer or Switches
Max Power Dissipation	3.1mW
Technology	BICMOS
Terminal Position	DUAL
Terminal Form	GULL WING
Peak Reflow Temperature (Cel)	260
Number of Functions	1
Supply Voltage	15V
Terminal Pitch	0.65mm
Time@Peak Reflow Temperature-Max (s)	30
Base Part Number	ADG426
Pin Count	28
Operating Supply Voltage	12V
Number of Channels	16
Interface	Parallel
Number of Circuits	1
Max Supply Voltage	25V
Analog IC - Other Type	SINGLE-ENDED MULTIPLEXER
Operating Supply Current	200μA
Nominal Supply Current	100μA
Power Dissipation	3.1mW
Max Supply Current	200μA
Propagation Delay	150 ns
Turn On Delay Time	240 ns
Number of Inputs	16
Neg Supply Voltage-Nom (Vsup)	-15V
Turn-Off Delay Time	110 ns
Max Dual Supply Voltage	22V
On-State Resistance (Max)	80Ohm
High Level Output Current	20mA
Dual Supply Voltage	15V
Multiplexer/Demultiplexer Circuit	16:1
Off-state Isolation-Nom	75 dB
Current - Leakage (IS(off)) (Max)	500pA

ADG426BRSZ Overview

The electronic component is convenient to ship overseas because it is packed in a 28-SSOP (0.209, 5.30mm Width). In order to provide high reliability, an advanced packaging method Tube is used. There is an analog multiplexer mounted in position Surface Mount. Multiplexers and demultiplexers have the same number of circuits 16:1. Operating temperature extended to -40°C~85°C TA. Total terminations are 28. By its 16 channels, the electronic component provides high-quality output. An 15V voltage supply should allow the electrical part to be turned on and run. It is injected into the electrical part body with 28 pins. A total of 1 circuits make up this switch device. Try searching with ADG426 if you're looking for variants. This digital multiplexer has 80Ohm internal resistance. The functions of 28 pins can be found in the datasheets. The analog multiplexer shown here is a typical Multiplexer or Switches. An abnormal situation would be for the switch device to be supplied with a voltage greater than 25V. An operating current of 200μA would be sufficient for this switch device. It may damage the digital multiplexer if the voltage is higher than 200μA. Despite this switch device's dual supply capability, its voltage should not exceed 22V. With a SINGLE-ENDED MULTIPLEXER analog IC integrated into the board. It can operate from 12V operating voltages. There are 16 inputs to be operated. Resistivity from Drain to Source is 80Ohm for this electronic part.