ADG428BN
| Parameters | |
|---|---|
| Mounting Type | Through Hole |
| Package / Case | 18-DIP (0.300, 7.62mm) |
| Surface Mount | NO |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tube |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 18 |
| Terminal Finish | TIN LEAD |
| Technology | CMOS |
| Terminal Position | DUAL |
| Peak Reflow Temperature (Cel) | NOT SPECIFIED |
| Number of Functions | 1 |
| Supply Voltage | 15V |
| Terminal Pitch | 2.54mm |
| Reach Compliance Code | unknown |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Pin Count | 18 |
| Qualification Status | COMMERCIAL |
| Number of Channels | 8 |
| Number of Circuits | 1 |
| Analog IC - Other Type | SINGLE-ENDED MULTIPLEXER |
| Voltage - Supply, Single/Dual (±) | 12V ±15V |
| Neg Supply Voltage-Nom (Vsup) | -15V |
| On-State Resistance (Max) | 100Ohm |
| Multiplexer/Demultiplexer Circuit | 8:1 |
| Off-state Isolation-Nom | 75 dB |
| Current - Leakage (IS(off)) (Max) | 500pA |
| Channel Capacitance (CS(off), CD(off)) | 11pF 40pF |
| On-state Resistance Match-Nom | 10Ohm |
| Switch Time (Ton, Toff) (Max) | 150ns, 150ns |
| Charge Injection | 4pC |
| Channel-to-Channel Matching (ΔRon) | 10 Ω |
| Crosstalk | -85dB @ 1MHz |
| Switch-on Time-Max | 225ns |
| Switch-off Time-Max | 300ns |
| Height Seated (Max) | 4.48mm |
| Length | 22.865mm |
| Width | 7.62mm |
| RoHS Status | Non-RoHS Compliant |
ADG428BN Overview
Shipping overseas is convenient with the electronic component packed in 18-DIP (0.300, 7.62mm). High reliability is achieved by using advanced packaging method Tube. Through Hole is where this multiplexer is located. 8:1 is the ratio between multiplexers and demultiplexers. Operation at a temperature around -40°C~85°C TA. In total, 18 terminations have occurred. A 8 channel electronic part produces high-quality output. Turning on and running the electrical part should be easy with a 15V voltage supply. The electronic part body is injected with 18 pins. The circuits in this analogue multiplexer number 1. A SINGLE-ENDED MULTIPLEXER analog IC is integrated into the board.
ADG428BN Features
8 Channels
ADG428BN Applications
There are a lot of Rochester Electronics, LLC ADG428BN Analog Switches & Multiplexers ICs applications.
- Intelligent PBX
- CSU
- Channel Banks
- Relay replacements
- Battery-powered systems
- Digital Cross-Connects
- Fault Tolerant Systems
- DSLAMs
- High speed data transmission line cards
- RGB switches
