ADG428BN
| Parameters | |
|---|---|
| Mounting Type | Through Hole |
| Package / Case | 18-DIP (0.300, 7.62mm) |
| Surface Mount | NO |
| Number of Pins | 18 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tube |
| JESD-609 Code | e0 |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 18 |
| ECCN Code | EAR99 |
| Resistance | 100Ohm |
| Subcategory | Multiplexer or Switches |
| Max Power Dissipation | 470mW |
| Technology | CMOS |
| Terminal Position | DUAL |
| Number of Functions | 1 |
| Supply Voltage | 15V |
| Terminal Pitch | 2.54mm |
| Base Part Number | ADG428 |
| Pin Count | 18 |
| Operating Supply Voltage | 12V |
| Number of Channels | 8 |
| Number of Circuits | 1 |
| Analog IC - Other Type | SINGLE-ENDED MULTIPLEXER |
| Power Dissipation | 470mW |
| Throw Configuration | DPST |
| Number of Inputs | 8 |
| Neg Supply Voltage-Nom (Vsup) | -15V |
| Max Dual Supply Voltage | 22V |
| On-State Resistance (Max) | 100Ohm |
| Dual Supply Voltage | 15V |
| Multiplexer/Demultiplexer Circuit | 8:1 |
| Off-state Isolation-Nom | 75 dB |
| Current - Leakage (IS(off)) (Max) | 500pA |
| Channel Capacitance (CS(off), CD(off)) | 11pF 40pF |
| On-state Resistance Match-Nom | 10Ohm |
| Switch Time (Ton, Toff) (Max) | 150ns, 150ns |
| Charge Injection | 4pC |
| Channel-to-Channel Matching (ΔRon) | 10 Ω |
| Crosstalk | -85dB @ 1MHz |
| Switching | BREAK-BEFORE-MAKE |
| Switch-on Time-Max | 225ns |
| Switch-off Time-Max | 300ns |
| Voltage - Supply, Dual (V±) | ±15V |
| Height | 3.3mm |
| Length | 22.86mm |
| Width | 6.35mm |
| Radiation Hardening | No |
| RoHS Status | Non-RoHS Compliant |
ADG428BN Overview
Due to its 18-DIP (0.300, 7.62mm) packaging, the electronic part is convenient for international shipping. High reliability is ensured by the advanced packaging method Tube. In Through Hole, this analog switch is mounted. Multiplexers and demultiplexers have a number of circuits 8:1. Operating temperature around -40°C~85°C TA extended. There are 18 terminations totally. This electronic part offers high-quality output due to its 8 channels. It is safe to turn on and run the electronic component with a 15V voltage supply. 18 pins are injected to the electronic part body. A total of 1 circuits make up this switch device. If you are looking for variants of the digital switch, trying search with ADG428. As far as internal resistance is concerned, it has 100Ohm. The datasheets for the 18 pins explain the functions. A analogue multiplexer of this type is a Multiplexer or Switches. If put voltage greater than 22V on the multiplexer, damage may be caused to the device. Integrated with SINGLE-ENDED MULTIPLEXER analog IC. The electronic component can function from 12V. The electrical component supports 8 inputs.
ADG428BN Features
8 Channels
ADG428BN Applications
There are a lot of Analog Devices Inc. ADG428BN Analog Switches & Multiplexers ICs applications.
- Sample hold systems
- Channel Banks
- Short/Medium Loop: approximately 2000 ft. of 26 AWG and 5 REN loads
- Public switching systems
- Power routing
- Relay replacements
- PDH Multiplexers
- E1 Multiplexer
- Existing multiplexer applications (both fault-protected and nonfault-protected)
- Isolation
