ADG428BP-REEL
| Parameters | |
|---|---|
| Mounting Type | Surface Mount |
| Package / Case | 20-LCC (J-Lead) |
| Surface Mount | YES |
| Number of Pins | 20 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e0 |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 20 |
| ECCN Code | EAR99 |
| Resistance | 100Ohm |
| Subcategory | Multiplexer or Switches |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | J BEND |
| Peak Reflow Temperature (Cel) | 225 |
| Number of Functions | 1 |
| Supply Voltage | 15V |
| Reach Compliance Code | not_compliant |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | ADG428 |
| Pin Count | 20 |
| Qualification Status | Not Qualified |
| Number of Channels | 8 |
| Number of Circuits | 1 |
| Analog IC - Other Type | SINGLE-ENDED MULTIPLEXER |
| Power Dissipation | 800mW |
| Throw Configuration | DPST |
| Number of Inputs | 8 |
| Voltage - Supply, Single/Dual (±) | 12V ±15V |
| Neg Supply Voltage-Nom (Vsup) | -15V |
| Max Dual Supply Voltage | 22V |
| On-State Resistance (Max) | 100Ohm |
| Dual Supply Voltage | 15V |
| Multiplexer/Demultiplexer Circuit | 8:1 |
| Off-state Isolation-Nom | 75 dB |
| Current - Leakage (IS(off)) (Max) | 500pA |
| Channel Capacitance (CS(off), CD(off)) | 11pF 40pF |
| On-state Resistance Match-Nom | 10Ohm |
| Switch Time (Ton, Toff) (Max) | 150ns, 150ns |
| Charge Injection | 4pC |
| Channel-to-Channel Matching (ΔRon) | 10 Ω |
| Crosstalk | -85dB @ 1MHz |
| Switching | BREAK-BEFORE-MAKE |
| Switch-on Time-Max | 225ns |
| Switch-off Time-Max | 300ns |
| Signal Current-Max | 0.03A |
| Height Seated (Max) | 4.57mm |
| RoHS Status | Non-RoHS Compliant |
ADG428BP-REEL Overview
The electrical component comes in 20-LCC (J-Lead) packaging, which makes it convenient to ship overseas. High reliability is ensured by the advanced packaging method Tape & Reel (TR). This analog switch is mounted in Surface Mount. There is 8:1 ratio between the number of multiplexers and demultiplexers. Extended operating temperature around -40°C~85°C TA. In total, there have been 20 terminations. The electronic part delivers high-quality output through its 8 channels. Powered by a 15V voltage supply, the electrical part should be switched on and run. 20 pins are injected to the electronic part body. The circuits in this analogue multiplexer number 1. Search with ADG428 if you are looking for analog multiplexer variants. Internally, this switch multiplexer has a resistance of 100Ohm. To find out what the 20 pins do, please refer to the datasheets. Multiplexer or Switches is a typical switch device. There is no problem with using dual supply voltage, but it should not exceed 22V. This product is integrated with an analog integrated circuit (IC) of type SINGLE-ENDED MULTIPLEXER. There are 8 inputs to be operated.
ADG428BP-REEL Features
8 Channels
ADG428BP-REEL Applications
There are a lot of Analog Devices Inc. ADG428BP-REEL Analog Switches & Multiplexers ICs applications.
- High-Voltage
- Switching Systems
- Private Branch Exchange (PBX)
- ADCs such as AD7840/8, AD7870/1/2/4/5/6/8
- Microprocessor controlled systems
- Avionics
- Relay replacements
- DVD-R
- Audio and video switching
- Avionics and Military Systems
