ADG428BPZ
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | PRODUCTION (Last Updated: 1 month ago) |
| Mounting Type | Surface Mount |
| Package / Case | 20-LCC (J-Lead) |
| Surface Mount | YES |
| Number of Pins | 20 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tube |
| JESD-609 Code | e3 |
| Pbfree Code | no |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 20 |
| ECCN Code | EAR99 |
| Resistance | 100Ohm |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Multiplexer or Switches |
| Max Power Dissipation | 800mW |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | J BEND |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 15V |
| Base Part Number | ADG428 |
| Pin Count | 20 |
| Operating Supply Voltage | 15V |
| Number of Channels | 8 |
| Interface | Parallel |
| Number of Circuits | 1 |
| Max Supply Voltage | 25V |
| Analog IC - Other Type | SINGLE-ENDED MULTIPLEXER |
| Power Dissipation | 1.6mW |
| Throw Configuration | DPST |
| Turn On Delay Time | 225 ns |
| Number of Inputs | 8 |
| Voltage - Supply, Single/Dual (±) | 12V ±15V |
| Neg Supply Voltage-Nom (Vsup) | -15V |
| Turn-Off Delay Time | 300 ns |
| Max Dual Supply Voltage | 22V |
| On-State Resistance (Max) | 100Ohm |
| Dual Supply Voltage | 15V |
| Multiplexer/Demultiplexer Circuit | 8:1 |
| Off-state Isolation-Nom | 75 dB |
| Current - Leakage (IS(off)) (Max) | 500pA |
| Channel Capacitance (CS(off), CD(off)) | 11pF 40pF |
| On-state Resistance Match-Nom | 10Ohm |
| Switch Time (Ton, Toff) (Max) | 150ns, 150ns |
| Charge Injection | 4pC |
| Channel-to-Channel Matching (ΔRon) | 10 Ω |
| Crosstalk | -85dB @ 1MHz |
| Switching | BREAK-BEFORE-MAKE |
| Drain to Source Resistance | 100Ohm |
| Signal Current-Max | 0.03A |
| Height | 3.68mm |
| Length | 9.04mm |
| Width | 9.04mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Contains Lead |
ADG428BPZ Overview
The electrical component comes in 20-LCC (J-Lead) packaging, which makes it convenient to ship overseas. Advanced packaging method Tube is used to provide high reliability. This analog switch is mounted in Surface Mount. 8:1 is the ratio of multiplexer to demultiplexer circuits. Operating temperature extended to -40°C~85°C TA. 20 terminations have been made so far. The electronic part provides high-quality output because it has 8 channels. Turning on and running the electrical part should be easy with a 15V voltage supply. 20 pins are injected to the electronic part body. It consists of 1 circuits. ADG428 can be used to search for analog multiplexer variants. This digital multiplexer has 100Ohm internal resistance. You can find the functions of the 20 pins in the datasheets. The analog multiplexer shown here is a typical Multiplexer or Switches. An abnormal situation would be for the switch device to be supplied with a voltage greater than 25V. Dual supply volatge is feasible for this multiplexer. But it should not go beyond 22V. With a SINGLE-ENDED MULTIPLEXER analog IC integrated into the board. 15V operating voltages are supported by the electronic component. The 8 inputs need to be operated in order to work. A Drain to Source resistance of 100Ohm is shown for this electronic part.
ADG428BPZ Features
8 Channels
Drain-to-Source resistance: 100Ohm
ADG428BPZ Applications
There are a lot of Analog Devices Inc. ADG428BPZ Analog Switches & Multiplexers ICs applications.
- Avionics and Military Systems
- Battery Powered Instruments
- 65 V DACs
- ADCs such as AD7840/8, AD7870/1/2/4/5/6/8
- Medical Instrumentation
- DSLAMs
- Digital access cross connects
- CSU
- PDAs
- Low-Voltage
