ADG428BPZ-REEL
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | PRODUCTION (Last Updated: 3 months ago) |
| Mounting Type | Surface Mount |
| Package / Case | 20-LCC (J-Lead) |
| Surface Mount | YES |
| Number of Pins | 20 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e3 |
| Pbfree Code | no |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 20 |
| ECCN Code | EAR99 |
| Resistance | 100Ohm |
| Terminal Finish | Matte Tin (Sn) |
| Max Power Dissipation | 800mW |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | J BEND |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 15V |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | ADG428 |
| Pin Count | 20 |
| Operating Supply Voltage | 12V |
| Number of Channels | 8 |
| Interface | Parallel |
| Number of Circuits | 1 |
| Max Supply Voltage | 25V |
| Operating Supply Current | 20μA |
| Power Dissipation | 1.6mW |
| Throw Configuration | DPST |
| Propagation Delay | 250 ns |
| Turn On Delay Time | 300 ns |
| Logic Function | Multiplexer |
| Number of Inputs | 8 |
| Supply Type | Dual, Single |
| Neg Supply Voltage-Nom (Vsup) | -15V |
| Turn-Off Delay Time | 300 ns |
| Max Dual Supply Voltage | 22V |
| On-State Resistance (Max) | 100Ohm |
| Dual Supply Voltage | 15V |
| Multiplexer/Demultiplexer Circuit | 8:1 |
| Off-state Isolation-Nom | 75 dB |
| Current - Leakage (IS(off)) (Max) | 500pA |
| Channel Capacitance (CS(off), CD(off)) | 11pF 40pF |
| On-state Resistance Match-Nom | 10Ohm |
| Switch Time (Ton, Toff) (Max) | 150ns, 150ns |
| Charge Injection | 4pC |
| Channel-to-Channel Matching (ΔRon) | 10 Ω |
| Crosstalk | -85dB @ 1MHz |
| Switching | BREAK-BEFORE-MAKE |
| Signal Current-Max | 0.03A |
| Voltage - Supply, Dual (V±) | ±15V |
| Height Seated (Max) | 4.57mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Contains Lead |
ADG428BPZ-REEL Overview
Packed in 20-LCC (J-Lead), the electronic component is convenient for shipping overseas. Advanced packaging method Tape & Reel (TR) is used to provide high reliability. Mounted in Surface Mount is this multiplexer. 8:1 is the number of circuits in the multiplexer and demultiplexer. Operating temperature around -40°C~85°C TA extended. There are 20 terminations totally. A high-quality output is provided by the electrical component's 8 channels. When the electronic component is given a voltage of 15V, it should be turned on and run. As part of the design of the 20 series, this electronic part has been incorporated into the system. There are 1 circuits in this multiplexer. ADG428 can be used to search for analog multiplexer variants. Internally, this switch multiplexer has a resistance of 100Ohm. You can find the functions of the 20 pins in the datasheets. It is generally not recommended to supply a voltage higher than 25V to the switch device in normal circumstances. The digital multiplexer has a low cost Dual, Single supply. It would be sufficient to run this analogue multiplexer with 20μA current. For this multiplexer, dual supply voltage is feasible, but it should not exceed 22V. Operating voltages range from 12V. It is possible to operate 8 inputs.
ADG428BPZ-REEL Features
8 Channels
20μA Supply Current
ADG428BPZ-REEL Applications
There are a lot of Analog Devices Inc. ADG428BPZ-REEL Analog Switches & Multiplexers ICs applications.
- SONET/SDH ADM
- Private Branch Exchange (PBX)
- Voice over IP/DSL – Integrated Access Devices, Smart
- Switching Systems
- T1/E1 Terminals
- Digital access cross connects
- Audio and video signal routing
- PDH Multiplexers
- Precision test equipment
- Communications systems
