ADG428BR
| Parameters | |
|---|---|
| Mounting Type | Surface Mount |
| Package / Case | 18-SOIC (0.295, 7.50mm Width) |
| Surface Mount | YES |
| Number of Pins | 18 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tube |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 18 |
| ECCN Code | EAR99 |
| Resistance | 100Ohm |
| Subcategory | Multiplexer or Switches |
| Max Power Dissipation | 600mW |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 240 |
| Number of Functions | 1 |
| Supply Voltage | 15V |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | ADG428 |
| Pin Count | 18 |
| Operating Supply Voltage | 12V |
| Number of Channels | 8 |
| Number of Circuits | 1 |
| Analog IC - Other Type | SINGLE-ENDED MULTIPLEXER |
| Operating Supply Current | 100μA |
| Power Dissipation | 1.6mW |
| Throw Configuration | DPST |
| Propagation Delay | 250 ns |
| Turn On Delay Time | 300 ns |
| Number of Inputs | 8 |
| Neg Supply Voltage-Nom (Vsup) | -15V |
| Turn-Off Delay Time | 300 ns |
| Max Dual Supply Voltage | 22V |
| On-State Resistance (Max) | 100Ohm |
| Dual Supply Voltage | 15V |
| Multiplexer/Demultiplexer Circuit | 8:1 |
| Off-state Isolation-Nom | 75 dB |
| Current - Leakage (IS(off)) (Max) | 500pA |
| Channel Capacitance (CS(off), CD(off)) | 11pF 40pF |
| On-state Resistance Match-Nom | 10Ohm |
| Switch Time (Ton, Toff) (Max) | 150ns, 150ns |
| Charge Injection | 4pC |
| Channel-to-Channel Matching (ΔRon) | 10 Ω |
| Crosstalk | -85dB @ 1MHz |
| Switching | BREAK-BEFORE-MAKE |
| Switch-on Time-Max | 225ns |
| Voltage - Supply, Dual (V±) | ±15V |
| Height Seated (Max) | 2.65mm |
| Width | 7.5mm |
| Radiation Hardening | No |
| RoHS Status | Non-RoHS Compliant |
| Lead Free | Contains Lead |
ADG428BR Overview
Presented in 18-SOIC (0.295, 7.50mm Width), this electrical component is convenient for overseas shipping. High reliability is ensured by the advanced packaging method Tube. In Surface Mount, this analog switch is mounted. There is 8:1 ratio between the number of multiplexers and demultiplexers. Operating temperature around -40°C~85°C TA extended. Totally, there are 18 terminations. Due to its 8 channels, the electrical component produces high-quality output. In the case of a voltage supply of 15V volts, the electrical part can be powered up and run. The electronic part body is injected with 18 pins. There are 1 circuits in this switch device. Using the ADG428 search parameter, you can discover variants of the switch. Analog switches have 100Ohm internal resistance. To find out what the functions of 18 pins are, please refer to their datasheets. There is a standard Multiplexer or Switches analogue multiplexer here. The switch device would be able to operate with 100μA current. For this switch device, it is feasible to have two supplies. However, the voltage should not exceed 22V. There is an integrated analog IC SINGLE-ENDED MULTIPLEXER in the module. Operating voltages range from 12V. A 8 input needs to be operated.
ADG428BR Features
8 Channels
100μA Supply Current
ADG428BR Applications
There are a lot of Analog Devices Inc. ADG428BR Analog Switches & Multiplexers ICs applications.
- Automatic test equipment
- Short/Medium Loop: approximately 2000 ft. of 26 AWG and 5 REN loads
- Industrial control systems
- Avionics
- Imaging
- RGB switches
- SDH/SONET multiplexers
- New designs requiring multiplexer functions
- Data Acquisition Systems
- Residential Gateways, Home Gateway/Router
