Parameters |
Factory Lead Time |
1 Week |
Lifecycle Status |
PRODUCTION (Last Updated: 3 months ago) |
Contact Plating |
Tin |
Mounting Type |
Surface Mount |
Package / Case |
18-SOIC (0.295, 7.50mm Width) |
Surface Mount |
YES |
Number of Pins |
18 |
Operating Temperature |
-40°C~85°C TA |
Packaging |
Tube |
JESD-609 Code |
e3 |
Pbfree Code |
no |
Part Status |
Active |
Moisture Sensitivity Level (MSL) |
1 (Unlimited) |
Number of Terminations |
18 |
ECCN Code |
EAR99 |
Resistance |
100Ohm |
Subcategory |
Multiplexer or Switches |
Max Power Dissipation |
600mW |
Technology |
CMOS |
Terminal Position |
DUAL |
Terminal Form |
GULL WING |
Peak Reflow Temperature (Cel) |
260 |
Number of Functions |
1 |
Supply Voltage |
15V |
Time@Peak Reflow Temperature-Max (s) |
30 |
Base Part Number |
ADG428 |
Pin Count |
18 |
Operating Supply Voltage |
15V |
Number of Channels |
8 |
Interface |
Parallel |
Number of Circuits |
1 |
Max Supply Voltage |
25V |
Analog IC - Other Type |
SINGLE-ENDED MULTIPLEXER |
Operating Supply Current |
20μA |
Nominal Supply Current |
20μA |
Power Dissipation |
1.6mW |
Max Supply Current |
100μA |
Throw Configuration |
DPST |
Propagation Delay |
250 ns |
Turn On Delay Time |
225 ns |
Number of Inputs |
8 |
Voltage - Supply, Single/Dual (±) |
12V ±15V |
Neg Supply Voltage-Nom (Vsup) |
-15V |
Turn-Off Delay Time |
300 ns |
Max Dual Supply Voltage |
22V |
On-State Resistance (Max) |
100Ohm |
High Level Output Current |
30mA |
Dual Supply Voltage |
15V |
Multiplexer/Demultiplexer Circuit |
8:1 |
Off-state Isolation-Nom |
75 dB |
Current - Leakage (IS(off)) (Max) |
500pA |
Channel Capacitance (CS(off), CD(off)) |
11pF 40pF |
On-state Resistance Match-Nom |
10Ohm |
Switch Time (Ton, Toff) (Max) |
150ns, 150ns |
Charge Injection |
4pC |
Channel-to-Channel Matching (ΔRon) |
10 Ω |
Crosstalk |
-85dB @ 1MHz |
Switching |
BREAK-BEFORE-MAKE |
Signal Current-Max |
0.03A |
Height |
2.35mm |
Length |
11.75mm |
Width |
7.6mm |
Radiation Hardening |
No |
REACH SVHC |
No SVHC |
RoHS Status |
ROHS3 Compliant |
Lead Free |
Contains Lead |
ADG428BRZ Overview
This electronic part is conveniently packaged in 18-SOIC (0.295, 7.50mm Width), making it easy to ship abroad. High reliability is provided by advanced packaging method Tube. There is an analog multiplexer mounted in position Surface Mount. 8:1 is the ratio between multiplexers and demultiplexers. Operational temperature extended around -40°C~85°C TA. A total of 18 terminations have been recorded. High-quality output is provided by the electronic component's 8 channels. In the case of a voltage supply of 15V volts, the electrical part can be powered up and run. An injection of 18 pins is performed into the body of the electrical component. Circuits number 1 make up this analogue multiplexer. Try searching with ADG428 to find analog multiplexer variants. There is 100Ohm internal resistance in this digital multiplexer. The functions of 18 pins can be found in the datasheets. It is a typical Multiplexer or Switches analog multiplexer. A voltage higher than 25V should not normally be supplied to the switches. It would be sufficient to run this analogue multiplexer with 20μA current. The analogue multiplexer may be damaged if voltage is greater than 100μA. If put voltage greater than 22V on the multiplexer, damage may be caused to the device. There is an integrated analog IC SINGLE-ENDED MULTIPLEXER in the module. 15V operating voltages are supported by the electronic component. Operating the 8 inputs requires 8 inputs.
ADG428BRZ Features
8 Channels
20μA Supply Current
ADG428BRZ Applications
There are a lot of Analog Devices Inc. ADG428BRZ Analog Switches & Multiplexers ICs applications.
- Sample-and-hold systems
- Video signal routing
- RGB switches
- SONET
- Central office
- Medical systems
- High-Voltage
- Intelligent PBX
- Audio and video switching
- HDTV