ADG431BN

90ns, 60ns SPST - NC 24Ohm DUAL Analog Switches BREAK-BEFORE-MAKE ADG431 16 Pins 250pA 15V 16-DIP (0.300, 7.62mm)

Manufacturer: Analog Devices Inc.
Nocochips NO: 84-ADG431BN
Package: 16-DIP (0.300, 7.62mm)
Datasheet: PDF
Stock: 958
Description: 90ns, 60ns SPST - NC 24Ohm DUAL Analog Switches BREAK-BEFORE-MAKE ADG431 16 Pins 250pA 15V 16-DIP (0.300, 7.62mm)(Kg)

Details

Tags

Parameters
Nominal Supply Current	100mA
Power Dissipation	470mW
Max Supply Current	100nA
Throw Configuration	SPST
Turn On Delay Time	165 ns
Neg Supply Voltage-Nom (Vsup)	-15V
Turn-Off Delay Time	60 ns
Max Dual Supply Voltage	22V
On-State Resistance (Max)	24Ohm
High Level Output Current	30mA
Dual Supply Voltage	15V
Multiplexer/Demultiplexer Circuit	1:1
Off-state Isolation-Nom	68 dB
Current - Leakage (IS(off)) (Max)	250pA
Channel Capacitance (CS(off), CD(off))	9pF 9pF
On-state Resistance Match-Nom	0.85Ohm
Switch Circuit	SPST - NC
Switch Time (Ton, Toff) (Max)	90ns, 60ns
Charge Injection	5pC
Channel-to-Channel Matching (ΔRon)	1.2 Ω
Crosstalk	-85dB @ 1MHz
Switching	BREAK-BEFORE-MAKE
Switch-off Time-Max	130ns
Drain to Source Resistance	17mOhm
Normal Position	NC
Neg Supply Voltage-Min (Vsup)	-13.5V
Voltage - Supply, Dual (V±)	±15V
Height	3.3mm
Length	20.07mm
Width	6.35mm
RoHS Status	Non-RoHS Compliant
Mounting Type	Through Hole
Package / Case	16-DIP (0.300, 7.62mm)
Surface Mount	NO
Number of Pins	16
Operating Temperature	-40°C~85°C TA
Packaging	Tube
JESD-609 Code	e0
Part Status	Obsolete
Moisture Sensitivity Level (MSL)	1 (Unlimited)
Number of Terminations	16
ECCN Code	EAR99
Resistance	24Ohm
Terminal Finish	Tin/Lead (Sn85Pb15)
Additional Feature	ALSO OPERATE WITH 12V NOMINAL SINGLE SUPPLY
Subcategory	Multiplexer or Switches
Technology	CMOS
Terminal Position	DUAL
Peak Reflow Temperature (Cel)	NOT SPECIFIED
Number of Functions	4
Supply Voltage	15V
Reach Compliance Code	not_compliant
Time@Peak Reflow Temperature-Max (s)	NOT SPECIFIED
Base Part Number	ADG431
Pin Count	16
Qualification Status	Not Qualified
Operating Supply Voltage	12V
Polarity	Inverting
Supply Voltage-Min (Vsup)	13.5V
Number of Channels	4
Max Supply Voltage	25V
Operating Supply Current	100mA

ADG431BN Overview

As the electronic part is packed in 16-DIP (0.300, 7.62mm), international shipping is convenient. To ensure high reliability, a new packaging method Tube is used. In Through Hole, you'll find this switch device. 1:1 is the ratio between multiplexers and demultiplexers. Extended operating temperature around -40°C~85°C TA. In total, there have been 16 terminations. As a result of its 4 channels, this electronic component provides high-quality output. Turning on and running the electrical part should be easy with a 15V voltage supply. The electrical component body receives 16 pins. SPST - NC switching circuits are used in these analog switch ics. Try searching with ADG431 to find analog multiplexer variants. A 24Ohm internal resistance characterizes this multiplexer. Please refer to the datasheets for 16 pins functions. A analogue multiplexer of this type is a Multiplexer or Switches. normally, users should not supply switches with voltages higher than 25V. This multiplexer would work with 100mA current. The analogue multiplexer may be damaged if voltage is greater than 100nA. It is possible to supply this switch device with dual voltages. However, it is not advisable to exceed 22V. The electrical part can be operated at 12V voltage levels. This electrical component also includes additional features such as ALSO OPERATE WITH 12V NOMINAL SINGLE SUPPLY. There is 17mOhm Drain to Source resistance on this electronic part. This digital multiplexer requires 13.5V voltage as a minimum supply voltage.

ADG431BN Features

4 Channels
Switch Circuit: SPST - NC
100mA Supply Current
Additional Features: ALSO OPERATE WITH 12V NOMINAL SINGLE SUPPLY
Drain-to-Source resistance: 17mOhm