ADG431BR

90ns, 60ns SPST - NC 24Ohm Analog Switches BREAK-BEFORE-MAKE ADG431 16 Pins 250pA 15V 16-SOIC (0.154, 3.90mm Width)

Manufacturer: Analog Devices Inc.
Nocochips NO: 84-ADG431BR
Package: 16-SOIC (0.154, 3.90mm Width)
Datasheet: PDF
Stock: 827
Description: 90ns, 60ns SPST - NC 24Ohm Analog Switches BREAK-BEFORE-MAKE ADG431 16 Pins 250pA 15V 16-SOIC (0.154, 3.90mm Width)(Kg)

Details

Tags

Parameters
Mounting Type	Surface Mount
Package / Case	16-SOIC (0.154, 3.90mm Width)
Surface Mount	YES
Number of Pins	16
Operating Temperature	-40°C~85°C TA
Packaging	Tube
JESD-609 Code	e0
Pbfree Code	no
Part Status	Obsolete
Moisture Sensitivity Level (MSL)	1 (Unlimited)
Number of Terminations	16
ECCN Code	EAR99
Resistance	24Ohm
Terminal Finish	Tin/Lead (Sn85Pb15)
Subcategory	Multiplexer or Switches
Max Power Dissipation	7.7μW
Technology	CMOS
Terminal Form	GULL WING
Peak Reflow Temperature (Cel)	235
Number of Functions	4
Supply Voltage	15V
Terminal Pitch	1.27mm
Time@Peak Reflow Temperature-Max (s)	20
Base Part Number	ADG431
Pin Count	16
Operating Supply Voltage	12V
Polarity	Inverting
Number of Channels	4
Interface	Parallel
Max Supply Voltage	25V
Min Supply Voltage	5V
Operating Supply Current	100pA
Power Dissipation	3.5μW
Max Supply Current	100nA
Throw Configuration	SPST
Turn On Delay Time	165 ns
Supply Type	Dual, Single
Neg Supply Voltage-Nom (Vsup)	-15V
Turn-Off Delay Time	130 ns
Max Dual Supply Voltage	22V
On-State Resistance (Max)	24Ohm
Min Dual Supply Voltage	13.5V
High Level Output Current	30mA
Dual Supply Voltage	15V
Multiplexer/Demultiplexer Circuit	1:1
Off-state Isolation-Nom	68 dB
Current - Leakage (IS(off)) (Max)	250pA
Channel Capacitance (CS(off), CD(off))	9pF 9pF
On-state Resistance Match-Nom	0.85Ohm
Switch Circuit	SPST - NC
Switch Time (Ton, Toff) (Max)	90ns, 60ns
Charge Injection	5pC
Channel-to-Channel Matching (ΔRon)	1.2 Ω
Crosstalk	-85dB @ 1MHz
Switching	BREAK-BEFORE-MAKE
Normal Position	NC
Voltage - Supply, Dual (V±)	±15V
Height	1.5mm
Length	10mm
Width	4mm
Radiation Hardening	No
RoHS Status	Non-RoHS Compliant
Lead Free	Contains Lead

ADG431BR Overview

This electronic part is conveniently packaged in 16-SOIC (0.154, 3.90mm Width), making it easy to ship abroad. High reliability is provided by advanced packaging method Tube. A switch device like this is mounted in Surface Mount. In the multiplexer and demultiplexer, 1:1 represents the number of circuits. Extended operating temperature around -40°C~85°C TA. A total of 16 terminations have been recorded. The electronic part delivers high-quality output through its 4 channels. A 15V voltage supply should turn on and run the electronic component. It is part of the design of the 16 series that this electronic component is included. Based on SPST - NC switching circuits, these analog multiplexers work. Try searching with ADG431 if you're looking for variants. As far as internal resistance is concerned, it has 24Ohm. Please refer to the datasheets for 16 pins functions. There is Multiplexer or Switches analog multiplexer like this in the world. In normalcircumstances, users should not exceed 25V volts for the multiplexer. An effective Dual, Single supply digital multiplexer. 5V is the lowest voltage that should be fed to the electronic electronic part. The switch device would be able to operate with 100pA current. The switch multiplexer may be damaged if it is exposed to voltage greater than 100nA. For this switch, a dual supply voltage is feasible, but it must not exceed 22VWhen using dual power supplies, you should attach at least 13.5V. Operating voltages of 12V are compatible with the electrical part.