ADG432BNZ
| Parameters | |
|---|---|
| Mounting Type | Through Hole |
| Package / Case | 16-DIP (0.300, 7.62mm) |
| Surface Mount | NO |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tube |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 16 |
| Terminal Finish | MATTE TIN |
| Technology | CMOS |
| Terminal Position | DUAL |
| Peak Reflow Temperature (Cel) | NOT SPECIFIED |
| Number of Functions | 4 |
| Supply Voltage | 15V |
| Reach Compliance Code | unknown |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Pin Count | 16 |
| JESD-30 Code | R-PDIP-T16 |
| Qualification Status | COMMERCIAL |
| Number of Channels | 1 |
| Number of Circuits | 4 |
| Voltage - Supply, Single/Dual (±) | 12V ±15V |
| Neg Supply Voltage-Nom (Vsup) | -15V |
| On-State Resistance (Max) | 24Ohm |
| Multiplexer/Demultiplexer Circuit | 1:1 |
| Off-state Isolation-Nom | 68 dB |
| Current - Leakage (IS(off)) (Max) | 250pA |
| Channel Capacitance (CS(off), CD(off)) | 9pF 9pF |
| On-state Resistance Match-Nom | 0.85Ohm |
| Switch Circuit | SPST - NO |
| Switch Time (Ton, Toff) (Max) | 90ns, 60ns |
| Charge Injection | 5pC |
| Channel-to-Channel Matching (ΔRon) | 1.2 Ω |
| Crosstalk | -85dB @ 1MHz |
| Switch-on Time-Max | 165ns |
| Switch-off Time-Max | 130ns |
| Height Seated (Max) | 5.33mm |
| Length | 20.13mm |
| Width | 7.62mm |
| RoHS Status | ROHS3 Compliant |
ADG432BNZ Overview
Due to its 16-DIP (0.300, 7.62mm) packaging, the electronic part is convenient for international shipping. This high-reliability packaging method uses advanced packaging methods Tube. A switch device like this is mounted in Through Hole. There is 1:1 ratio between the number of multiplexers and demultiplexers. An extended operating temperature of -40°C~85°C TA degrees Celsius. In total, 16 terminations have occurred. A high-quality output is provided by the electrical component's 1 channels. Powered by a 15V voltage supply, the electrical part should be switched on and run. An injection of 16 pins is performed into the body of the electrical component. These analog multiplexers are built based on SPST - NO switching circuits. There are 4 circuits in this multiplexer.
ADG432BNZ Features
1 Channels
Switch Circuit: SPST - NO
ADG432BNZ Applications
There are a lot of Rochester Electronics, LLC ADG432BNZ Analog Switches & Multiplexers ICs applications.
- Ultrasound
- Remote Powered Equipment
- Microprocessor Controlled Analog Systems
- CSU
- Data Acquisition Systems
- DVD-R
- T1/E1 Terminals
- Communications systems
- Microprocessor controlled systems
- Cross Connects
